Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Oil temperature coding ToolBox which model?
09-10-2022, 16:52 PM,
Post: #1
XZBMW  Oil temperature coding ToolBox which model?
Hey guys, is it possible to code the oiltemperature instead of the momentary consumption? I’m using ToolBox

Is there a cheat sheet where all the engines are listed who work?


I’ve tried it with a 231ps 330d, that didn’t work. Needle didn’t move.
Quote this message in a reply
09-10-2022, 16:55 PM,
Post: #2
XZBMW  RE: Oil temperature coding ToolBox which model?
(09-10-2022, 16:52 PM)xMoses Wrote:  Hey guys, is it possible to code the oiltemperature instead of the momentary consumption? I’m using ToolBox

Is there a cheat sheet where all the engines are listed who work?


I’ve tried it with a 231ps 330d, that didn’t work. Needle didn’t move.

Values are individual, I have not met the same
Quote this message in a reply
09-10-2022, 17:36 PM,
Post: #3
RE: Oil temperature coding ToolBox which model?
(09-10-2022, 16:55 PM)KEIN Wrote:  
(09-10-2022, 16:52 PM)xMoses Wrote:  Hey guys, is it possible to code the oiltemperature instead of the momentary consumption? I’m using ToolBox

Is there a cheat sheet where all the engines are listed who work?


I’ve tried it with a 231ps 330d, that didn’t work. Needle didn’t move.

Values are individual, I have not met the same


What do you mean with values? The values for the temperature is ofc individual, just want to ask on which kombi for which engine this works. Sind on a kombi low with 330d engine it didn’t work. But if I did a manual input from 90degrees and set the needle, the needle was straight as it should be with the values I put in. But the car didn’t show it by itself
Quote this message in a reply
09-10-2022, 18:55 PM,
Post: #4
RE: Oil temperature coding ToolBox which model?
which engine do you have?

I know for sure that on n57 engine oil temperature is not working.

Instrument cluster doesn't receive that information from DDE over canbus.

Bye If I helped you please press thanks + rep  button   under 
Quote this message in a reply
09-10-2022, 20:03 PM,
Post: #5
RE: Oil temperature coding ToolBox which model?
(09-10-2022, 18:55 PM)kn6600 Wrote:  which engine do you have?

I know for sure that on n57 engine oil temperature is not working.

Instrument cluster doesn't receive that information from DDE over canbus.



335d e92 and alpina d3

Alpina could be working
Quote this message in a reply
10-10-2022, 09:16 AM,
Post: #6
RE: Oil temperature coding ToolBox which model?
Afaik these engines support oil temp.


Attached Files Thumbnail(s)
   
Reputation: +1 - mr_nitroz [+1]
Quote this message in a reply
[+] 1 user says Thank You to duss46 for this post
10-10-2022, 10:09 AM,
Post: #7
RE: Oil temperature coding ToolBox which model?
(10-10-2022, 09:16 AM)duss46 Wrote:  Afaik these engines support oil temp.

Thanks, from where do you have this information ?
Quote this message in a reply
19-10-2022, 18:00 PM,
Post: #8
RE: Oil temperature coding ToolBox which model?
(10-10-2022, 10:09 AM)xMoses Wrote:  
(10-10-2022, 09:16 AM)duss46 Wrote:  Afaik these engines support oil temp.

Thanks, from where do you have this information ?

Don’t remember exactly, found it on some german forum.
Quote this message in a reply
19-10-2022, 18:19 PM,
Post: #9
RE: Oil temperature coding ToolBox which model?
on my e92 335d facelift, there was no oiltemp. data on the can-bus,cause there is no sensor. after coding "oiltemp. gauge" you could see the coolant temp instead. not as good as the oiltemp. but still better than no temp. at all.
Quote this message in a reply
20-10-2022, 11:08 AM,
Post: #10
RE: Oil temperature coding ToolBox which model?
(19-10-2022, 18:19 PM)E9235 Wrote:  on my e92 335d facelift, there was no oiltemp. data on the can-bus,cause there is no sensor. after coding "oiltemp. gauge" you could see the coolant temp instead. not as good as the oiltemp. but still better than no temp. at all.

We tried that, the cluster didn't show anything on kva. Did you use toolbox?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  BMW F10 RHD to LHD coding? morto 10 1,211 8 hours ago
Last Post: muskatas
XZBMW G15 remember last driving mode & ECO PRO MSA memory coding duss46 7 339 26-03-2024, 18:56 PM
Last Post: duss46
XZBMW coding g12 remote key /m display redog4dy 5 187 26-03-2024, 07:23 AM
Last Post: Siki78
  Some news, secure coding coming to new bikes :/ Node 8 1,001 25-03-2024, 15:13 PM
Last Post: RuleNormaliai
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 660 25-03-2024, 08:11 AM
Last Post: Node
  Need help coding out SOS BMW E60 tigre 8 187 24-03-2024, 21:25 PM
Last Post: jararak
  Engine swap E60 535d --> E61 530d coding advice requested Stratofortress 9 298 23-03-2024, 14:59 PM
Last Post: Simoniak
  BMW E87 swap M5 V10 coding cluster Pedrom92 0 97 20-03-2024, 22:50 PM
Last Post: Pedrom92
XZBMW G20- Higher capacity battery coding hallamnet 2 302 19-03-2024, 07:06 AM
Last Post: MasterGt
  Looking for a car which has secure coding to program Fx82 0 193 18-03-2024, 22:57 PM
Last Post: Fx82

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content