Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Modify km Golf VII cluster with carprog online
12-10-2022, 17:17 PM,
Post: #1
|
|||
|
|||
Modify km Golf VII cluster with carprog online
im looking to modify km from the cluster with carprog online but im getting an error " immo active , can`t enter service mode without working key "
the car has the BCM changed from scarp . |
|||
12-10-2022, 19:23 PM,
Post: #2
|
|||
|
|||
RE: Modify km Golf VII cluster with carprog online
adopt immo then do your vodooo with carprog
|
|||
13-10-2022, 06:20 AM,
Post: #3
|
|||
|
|||
RE: Modify km Golf VII cluster with carprog online
The problem is that the Immo box is grey, I can't make the adapt!
|
|||
19-10-2022, 20:03 PM,
Post: #4
|
|||
|
|||
RE: Modify km Golf VII cluster with carprog online
make your car error free then try with odo
|
|||
19-10-2022, 20:34 PM,
Post: #5
|
|||
|
|||
RE: Modify km Golf VII cluster with carprog online
(12-10-2022, 17:17 PM)sorin.henea Wrote: im looking to modify km from the cluster with carprog online but im getting an error " immo active , can`t enter service mode without working key " normally i do a back up before i change something else.. what fault code you have on instrument cluster now? If you like my post please press
|
|||
21-10-2022, 20:54 PM,
Post: #6
|
|||
|
|||
RE: Modify km Golf VII cluster with carprog online
(19-10-2022, 20:34 PM)jhon006 Wrote:(12-10-2022, 17:17 PM)sorin.henea Wrote: im looking to modify km from the cluster with carprog online but im getting an error " immo active , can`t enter service mode without working key " active errors on cluster : B104B31 - Key no signal B104C29 - Key range/ performance U112100 - Data bus message missing U111000 - Function restriction caused by communication interruption |
|||
22-10-2022, 16:35 PM,
Post: #7
|
|||
|
|||
RE: Modify km Golf VII cluster with carprog online
(21-10-2022, 20:54 PM)sorin.henea Wrote:(19-10-2022, 20:34 PM)jhon006 Wrote:(12-10-2022, 17:17 PM)sorin.henea Wrote: im looking to modify km from the cluster with carprog online but im getting an error " immo active , can`t enter service mode without working key " Possible cause: engine ECU was changed, ECU was immo off and not adapted online.. you can try if you have Autell, xtool.. ALL key lost! Good Luck If you like my post please press
|
|||
Reputation: +2 - al70 [+1] , sorin.henea [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content