[haker112000]

Pozdrav svima,
Molimo, imamo BMW 118D + svi ključevi su izgubljeni oštećeni Flashom i eep CAS-om, auto je daleko jer to moramo učiniti na stolu.
kupili smo rabljeni CAS i moramo preuzeti sve potrebne podatke za pokretanje ovog automobila.
svi ispisi u prilogu Novi i stari CAS ispisi + ECU ispis edc17cp02
Hvala unaprijed
CAS3 5WK4 9513YBR
61.35-9147226-01
Originalni ključ:
ID1:E3 F0 16 98
ID2:BB 41 50 97

ISN broj iz ECU-a trebao bi biti: 47 E6 55 0E B2 70 E1 E7 11 6D 41 EB 86 B8 44 DC
BMW 118d N47 EDC17c06

[bikej78]

here, buddy, you have a mistake.

You wrote that you have - E8
Mine should be - EB

In Cas ISN 29 BC

it's best to do it after OBD

[haker112000]

Yes, my typo. Can you enter, program the ISN from the ECU into the CAS eprom container that I have attached. I do everything on the table, not on the OBD. This entry from the eprom CAS is from another car. I managed to change only the VIN number. The rest do not match

[bikej78]

sorry
I don't have that power
There are a lot of specialists here
Someone will help

[16eddi67]

Excuse me, do you understand what you are doing?
There are two keys in your dump.
key1 :57D0C696
key2 :F2D4C696

BR EDDY

[haker112000]

I have not encountered this before. I see they have two keys. The bin file was downloaded from the Internet. I have my two keys and I don't know what I can do now, to code them instead of these two existing ones. Now I'm interested in whether I can delete you from the register, and enter my ones that have started the car so far, and how. Mine are: Original key:
ID1:E3 F0 16 98
ID2: BB 41 50 97
Can you enter, program the ISN from the ECU into the CAS eprom container that I have attached

[haker112000]

I finally managed to code the old keys and ISN into the CAS from the ECU, and now the car starts, but my central locking and remote locking do not work. The lock button in the car works. What else needs to be done for the central lock to work. Every help is welcome

[elektronik13]

I finally managed to code the old keys and ISN into the CAS from the ECU, and now the car starts, but my central locking and remote locking do not work. The lock button in the car works. What else needs to be done for the central lock to work. Every help is welcome

need to transfer remote controller data from old cas to new cas

[haker112000]

Yes, but the old data is lost

[johann74270]

I finally managed to code the old keys and ISN into the CAS from the ECU, and now the car starts, but my central locking and remote locking do not work. The lock button in the car works. What else needs to be done for the central lock to work. Every help is welcome

Do your key frequency and frequency in CAS eprom correspond?