Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. Martech

  2. ATM - Balkan

    atm balkan file service
  3. Kess Ktag

  4. MOD FILES

  5. Enigma Tool

  6. ECU CHIPS

  7. NBE Files



Post Reply 
[Diagnostic] Dr.Gini - B022 - 16.02.2018 Rev.02
22-10-2017, 17:39 PM
Post: #1231
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017
You guys are unbelievable smile1
All free and right now!

You have to know that there is a lot of work and investments in background
and also a lot of fantastic guys participating positively to this project

So, please be patient. I'm doing my best with what I have
Reputation: +3 - hulahans [+1] , umutbulut [+1] , Tombo [+1]
Find all posts by this user
Quote this message in a reply
 Thanks given by: snypertje , Tombo , Freddy1 , teerak2uk , nesa , hulahans , Jartsa , ipcsr76 , fumantwo , JBPBeast , 16eddi67 , Loliceman , Chriz , dazuc , winter , isma123 , webmaster750
22-10-2017, 20:18 PM (This post was last modified: 22-10-2017 20:24 PM by teerak2uk.)
Post: #1232
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017
(18-10-2017 12:39 PM)JBPBeast Wrote:  1. In order to get Dr.Gini Program work, a program called Ediabas must be properly installed.

2. BMW cars produced before 2003 are not supported yet.

3. Dr.Gini Program need these communication interfaces:

BMW ICOM A2

BMW ICOM Next

BMW K+DCAN Cable

BMW ENET Cable




How to install 2017 BMW Dr. Gini Diagnostic Program?

Step 1: Before install Dr.Gini, first you need to install EDIABAS.

In the EDIABAS folder, run the EDIABAS _7.3.0.msi file to install the EDIABAS program.

It is recommended that you do not change any settings during installation.






Step 2: Unpack the "Setup Dr.Gini B014 EN.zip" and run the program to install Dr.Gini.

At the end of the installation, the menu that you want to run the program is checked, but since the setup is not completed yet, it is unchecked and the installation is completed.




Step 3: After extracting the compressed files in the ECU folder, copy them to the ECU folder where EDIABAS program is installed.

If you did not change the settings during installation, this is the C:\ EDIABAS\ ECU folder.




Step 4: Copy the EDIABAS.INI file located in the "INTERFACES" folder→ ENET Ediabas.INI folder and overwrite the C: \ EDIABAS \ BIN folder, as Dr.Gini will be connected by the ENET cable.

You need to copy the api32.dll file in the "API32.DLL" folder to the folder below for each operating system.

For Windows 7/8 / 8.1 / 10 64-bit operating systems:

C:\Windows\SysWOW64

For Windows 7/8 / 8.1 / 10 32-bit operating systems:

C:\Windows\System32




Step 5(The final step): Copy the Gini_B020.exe file to the C: \ EDIABAS \ BIN folder.

Sometimes, Gini_B020.exe is recognized as a malicious program and may be removed from an anti-virus program. If you feel that this process is unstable, you can just delete this file.




OK. Now BMW Dr. Gini installation is complete!

Connect your car with BMW Dr. Gini via BMW ICOM, ICOM NEXT, INPA K+DCAN Cable or ENET Cable. And it's ready to use!

Turn on car ignition and run the Dr.Gini.exe located in the C:\EDIABAS\BIN folder.

Click the "Identification" button at the bottom of the screen. Then the software will directly connect to vehicle.



Does this look correct as instructions to install?
Nope still dont work for me

   
Find all posts by this user
Quote this message in a reply
22-10-2017, 20:57 PM (This post was last modified: 22-10-2017 21:17 PM by ivo1bg.)
Post: #1233
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017
Unfortunately after this procedure I have not working INPA any more. I didn't make a backup copies of the api32.dll and the ediabas.ini files which I replaced and now I am searching for them. When I click on Ediabas tab in Menu I get this error: Configuration update error. Would someone help me to resolve this issue?
Find all posts by this user
Quote this message in a reply
26-10-2017, 15:12 PM (This post was last modified: 26-10-2017 15:26 PM by JBPBeast.)
Post: #1234
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017
(22-10-2017 20:18 PM)teerak2uk Wrote:  
(18-10-2017 12:39 PM)JBPBeast Wrote:  [i]
Nope still dont work for me


Dr. Gini himself replied to my post and said some of the steps I had shown are now unnecessary.

I haven't had a chance to try again, should be able to find some time soon and will post my results.
Find all posts by this user
Quote this message in a reply
27-10-2017, 06:50 AM (This post was last modified: 27-10-2017 06:55 AM by Gini.)
Post: #1235
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017
How to Install Dr. Gini
all necessary files following the link on the first post of this thread

1. Ediabas
-> use the installer with default settings
-> update the ECU folder

2. Dr.Gini
-> use the installer with default settings





teerak2uk and JBPBeast,
please delete the wrong installation instructions from your respective posts

Before posting any instructions, please test them first
Reputation: +2 - Pl@y3R [+1] , umutbulut [+1]
Find all posts by this user
Quote this message in a reply
 Thanks given by: teerak2uk , Pl@y3R , umutbulut
27-10-2017, 07:35 AM
Post: #1236
[Diagnostic] Dr.Gini - B021 - 14.06.2017
And need to copy specific edibias.ini when using K+DCAN Cable ?
Find all posts by this user
Quote this message in a reply
27-10-2017, 11:56 AM (This post was last modified: 27-10-2017 11:58 AM by Gini.)
Post: #1237
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017
Please edit your post Post #1232
Remove these wrong instructions

No, just follow my instructions in Post Post: #1235
Interfaces are managed via the Dr.Gini once installed (Menu --> Interface)
Find all posts by this user
Quote this message in a reply
31-10-2017, 17:44 PM
Post: #1238
XZBMW RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017
Just downloaded and tried out Dr GINI for the first time on my 2014 F10. Awesome work - many thanks to Gini!! congrats

When I read the error codes for my car I see a page of horizontal lines - some marked in red. How do I know which of the date in each line is the error code? Is there a quick primer on using Dr. Gini for reading error codes?

I read on another forum that GINI only lists the last four digits of the error code - I'm not sure where to start so I thought I'd ask the source.

Thanks!
Find all posts by this user
Quote this message in a reply
01-11-2017, 07:02 AM
Post: #1239
RE: [Diagnostic] Dr.Gini - B021 - 14.06.2017
Errors codes without description are not translated yet
Find all posts by this user
Quote this message in a reply
17-11-2017, 18:36 PM (This post was last modified: 18-11-2017 18:21 PM by Pl@y3R.)
Post: #1240
[Diagnostic] Dr.Gini - B021 - 14.06.2017
Hi, i have 2 laptops, in 1st W7 64 bits, everything works fine ,
2nd one W7 32 bits i've installed today gini, ediabas 7.3.0 and changed ecu from 1st post, ediabas connect to the car, but when i open gini nothing happens. Thanks for any help
-------------------SOLVED-----------------
I've checked Dr.Gini properties. Compatibility was enable to run for W7, after disable everything works fine
Find all posts by this user
Quote this message in a reply
Post Reply 


Bookmarks

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  DVD 2018 Europe High for CCC in smercki 11 1,095 Yesterday 19:29 PM
Last Post: Pawel M
XZBMW BMW Road Map Europe Route 2018-1 Mega in lynxbmw 17 2,327 Yesterday 16:48 PM
Last Post: Ibrahim24
XZBMW BMW Navigation DVD Road Map Europe BUSINESS 2018 SA606 in Kure 1 137 Yesterday 16:24 PM
Last Post: jeroenbmw
  [torrent] Road Map Australia/New Zealand NEXT 2018 in lynxbmw 6 392 Yesterday 14:36 PM
Last Post: codemybmw
XZBMW ESys Launcher Premium 2.8.0 Build 143 works utill 28.06.2018 in damascus7 5 901 15-02-2018 13:01 PM
Last Post: RobyBS
  E-sys launcher 3.27 on VMware 2018 solution in TurboDriver 38 6,061 15-02-2018 12:45 PM
Last Post: RobyBS
XZBMW BMW ETK 01.2018 in edtech 10 2,232 14-02-2018 20:31 PM
Last Post: ykntr
XZBMW Request BMW Diagnostic Head Emulator v1.2 in babay 2 358 08-02-2018 02:39 AM
Last Post: babay
  BMW HIGH 2018-1 in ac427 10 1,521 06-02-2018 16:46 PM
Last Post: ac427
  BMW ETK 02.2018 in lynxbmw 4 1,005 04-02-2018 09:00 AM
Last Post: Shinoby

Forum Jump:


User(s) browsing this thread:
ciamardo, gix999, paulgsm, psx000, 2 Guest(s)

Return to TopReturn to Content