Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
【 Unsupported 】 [Diagnostic] Dr.Gini - B022 - 08 Oct 2018
26-10-2016, 22:08 PM,
Post: #691
|
|||
|
|||
RE: [Diagnostic] Dr.Gini - B014 - 01.04.2016
Welcome Gini.
When will version 15? |
|||
26-10-2016, 22:33 PM,
Post: #692
|
|||
|
|||
RE: [Diagnostic] Dr.Gini - B014 - 01.04.2016
(23-10-2016, 10:48 AM)Gini Wrote: Hi Almaretto, As far as I can tell, Dr. Gini software runs fine. I downloaded both DR.GINI & DR.GINI (Alternative Link). The Folder EDIABAS 7.3.0.zip looks the same as my currently installed version. It does not have C:\EDIABAS\Bin\Utils\ folder. I only have NET folder: The installation only comes wiht EDIC.sim, OBD.sim, and OMITEC.sim. Attached my *.SIM collection (408 files). I am especially looking for FRM3, LHM2_R/LHM2_L, TMS3_R/ TMS3_L, & other newer ones for G-series. I have updated PRG from ISTA-P, but get errors in Tool32 for missing SIM. |
|||
27-10-2016, 07:52 AM,
Post: #693
|
|||
|
|||
RE: [Diagnostic] Dr.Gini - B014 - 01.04.2016
Thanks for doing this Dr Gini , will I be able to read wheel speed sensor data with this tool?
|
|||
28-10-2016, 04:59 AM,
Post: #694
|
|||
|
|||
RE: [Diagnostic] Dr.Gini - B014 - 01.04.2016
Hi Almaretto,
open your C:\EDIABAS\Bin\EDIABAS.INI with NOTEPAD++ Make sure that the parameter: Simulation = 0 This will deactivate the simulation mode and allows you to connect to a real car |
|||
28-10-2016, 05:38 AM,
Post: #695
|
|||
|
|||
RE: [Diagnostic] Dr.Gini - B014 - 01.04.2016
(28-10-2016, 04:59 AM)Gini Wrote: Hi Almaretto, I do not have trouble connecting to real car. Mine does say Simulation = 0. |
|||
08-11-2016, 20:52 PM,
Post: #696
|
|||
|
|||
RE: [Diagnostic] Dr.Gini - B014 - 01.04.2016
|
|||
10-11-2016, 17:15 PM,
Post: #697
|
|||
|
|||
RE: [Diagnostic] Dr.Gini - B014 - 01.04.2016
Hi Gini,
I have a problem, "Ediabas error SYS 0005" in onglet "CIC/NBT". Thanks. |
|||
11-11-2016, 03:12 AM,
(This post was last modified: 11-11-2016, 03:50 AM by Gini.)
Post: #698
|
|||
|
|||
RE: [Diagnostic] Dr.Gini - B014 - 01.04.2016
Coming soon...
Hi BBriner, just ignore these errors. It means the corresponding ECU doesn't have the "Clear Information in Memory" function Hi xscale, since you are not providing enough information, I can't help much I suppose you are missing some files in C:\EDIABAS\Ecu\ Please download and replace all the content of C:\EDIABAS\Ecu\ with this attachment |