ATTENTION !! Users which have not any posts were deleted !
  1. New Emulator

  2. Julie Emulator

  3. Immo Bypass

  4. HEXPROG



2006 BMW E90 DDE7 DME Replacing Water Ingressed Unit
29-06-2020, 08:07 AM, (This post was last modified: 29-06-2020, 08:07 AM by smurf786.)
Post: #1
XZBMW  2006 BMW E90 DDE7 DME Replacing Water Ingressed Unit
Hi Guys,

Have a water damaged DME, can anyone tell me the process to replace this unit please?

I am unable to read flash from damaged unit as BDM port has pads that were corroded and ripped off. I will try and see if i can trace it and attempt to read.

I have read 95640 eeprom, could someone please give me the ISN and details from the file.

The DME is DDE 7801711 or 0281013251, Although BMW have also printed 7802868 If i get same part number can i swap over eeprom and attempt to start...

As i can't read flash i am unsure which DME part number i need to get, Any assistance will be greatly appreciated...

Thank you


Attached Files Thumbnail(s)
   
95640_DDE7801711_1.rar
File Type: .rar
Downloaded: 3 times
Size: 2.74 KB

Quote this message in a reply
29-06-2020, 20:32 PM,
Post: #2
RE: 2006 BMW E90 DDE7 DME Replacing Water Ingressed Unit
Hi
Your file ISN :- 24 A5
Reputation: +1 - smurf786 [+1]
Quote this message in a reply
[-] The following 1 user says Thank You to GsmOwar for this post:
  • smurf786
30-06-2020, 07:18 AM,
Post: #3
RE: 2006 BMW E90 DDE7 DME Replacing Water Ingressed Unit
Thank you i may be able to get same part number DDE, if i swap eeprom onto donor ecu should it start? What would be the process? Or would i need to read donor ecu, get isn and adjust cas unit to the ecu...

Is the ISN stored in flash too or only eeprom?

Thank you
Quote this message in a reply
30-06-2020, 20:05 PM, (This post was last modified: 01-07-2020, 20:33 PM by PhilipM.)
Post: #4
RE: 2006 BMW E90 DDE7 DME Replacing Water Ingressed Unit
ISN is in the flash(EDIT- ISN is eep, not flash!), you should be able to swap just the eeprom, this will be ISN and rolling codes, also injector codes.
Then use ISTA/P to tell you what software should be on the ECU to reprogram. You can either use ISTA/P to do it, or let it find the number, and then change to WinKFP to program it.
Reputation: +1 - al70 [+1]
Quote this message in a reply
01-07-2020, 10:25 AM,
Post: #5
RE: 2006 BMW E90 DDE7 DME Replacing Water Ingressed Unit
Don"t swap eeprom 
Simply 
Read dumb from new dde
Read eeprom from cas
Post Dumbs here i will match isn for you
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
ZTAudi Solved ✔ Audi A6 C6 2006 Ecu Adaptation smurf786 16 588 22-06-2020, 13:49 PM
Last Post: smurf786
RHonda 2006 Honda Civic PCM 4 digit pin? RYM6746 0 168 12-06-2020, 21:37 PM
Last Post: RYM6746
ZTAudi Audi A3 2006 MED9.1 IMMO OFF rautolock 3 221 03-06-2020, 09:12 AM
Last Post: dabaca
  Solved ✔ vw beetles 2006 immo off MARTINS AUTOMECH 2 811 26-05-2020, 21:24 PM
Last Post: MARTINS AUTOMECH
  2006 Iveco daily EDC16C8 with 95320 immo off flashdash 1 362 13-05-2020, 19:39 PM
Last Post: dabaca
  Smart 454 sam control unit assignment salliemohamed 3 247 11-05-2020, 01:23 AM
Last Post: salliemohamed
ZTAudi Audi A3 1.6 benzin 2006 m.y immo off Willinickersen 6 585 10-05-2020, 22:19 PM
Last Post: Willinickersen
ORenult CLIO EPS 2006 VIRGIN AUTOCODE 2 734 06-05-2020, 18:52 PM
Last Post: Follower92
  Audi A3 2006 1.9 ttdi Bosch immo off 03G906021LS EDC16U34 volksjet 1 529 03-05-2020, 23:40 PM
Last Post: GsmOwar
WKIA Smart Key Unit MC9S12XEQ384 full ilkovelichkov 4 333 16-04-2020, 05:47 AM
Last Post: ilkovelichkov

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content