[spooky75]

Hello,

I need to adjust idle and TBA after cleaning on Golf 2004 1.6 FSI BAG, but can't find working security access code for respective engine
Tested with 10011 and 12233, but without success.

Address 01: Engine        Labels: 03C-906-056-BAG.lbl
   Part No SW: 03C 906 056 A    HW: Hardware No 
   Component: MED9.5.10        00 5805  


If someone can be kind and share correct access code


Thank you in advance!

[Black Alien]

i thought youd post dumps
for example in MED9.5.10 theres eeprom 95080 inside

why dont you read cluster eeprom?

[spooky75]

i thought youd post dumps
for example in MED9.5.10 theres eeprom 95080 inside

why dont you read cluster eeprom?

I can't , don't have tools
Thought that I can pass with generic code for respective engine.
Didn't know that I need to have ECU/IMMO PIN for att adjust idle.

[nirvananils]

No need for Immo Login to adjust idle as this is not needed. No way to edit idle with diagnostics as it is bullshit to change idle. Just repair car, or modify it at chiptuner if you won't repair that issue

[Ecmbuster]

Read the label inside VCDS with Microsoft NotePad "03C-906-056-BAG.LBL" is a text file.
Post your faults, it is difficult to guess.
The throttle can be set if there are no errors. If there are errors, it will never set.
Start with KOEO
Basic Settings 060 >" Throttle Body Alignment" and with automatic transmission
Basic Settings 063 >"Electronic Throttle (Kick-Down Alignment)" wait till everything is complete.
Basic Settings 238 >"Fuel Injection (Fuel Pump Adaptation)"

This will work if the low pressure and high pressure pumps are operating to maintain idle.
Make sure the high pressure pump plunger is riding the cam shaft and NOT damaged.

[spooky75]

Read the label inside VCDS with Microsoft NotePad "03C-906-056-BAG.LBL" is a text file.
Post your faults, it is difficult to guess.
The throttle can be set if there are no errors. If there are errors, it will never set.
Start with KOEO
Basic Settings 060 >" Throttle Body Alignment" and with automatic transmission
Basic Settings 063 >"Electronic Throttle (Kick-Down Alignment)" wait till everything is complete.
Basic Settings 238 >"Fuel Injection (Fuel Pump Adaptation)"

This will work if the low pressure and high pressure pumps are operating to maintain idle.
Make sure the high pressure pump plunger is riding the cam shaft and NOT damaged.

Don't have any errors on car, idle is just low 630-670rpm, engine don't vibrating or stall. Cleaned TB, but still same.