Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
reset ista short circuit fault?
15-10-2022, 21:31 PM,
Post: #1
|
|||
|
|||
reset ista short circuit fault?
hello
can you reset a short circuit fault on a module with ista? |
|||
16-10-2022, 04:41 AM,
Post: #2
|
|||
|
|||
RE: reset ista short circuit fault?
|
|||
17-10-2022, 17:19 PM,
Post: #3
|
|||
|
|||
RE: reset ista short circuit fault?
Hi
I found no such option in "ista" if you mean the FRM module. Use the Tool32 to short circuit. |
|||
17-10-2022, 17:26 PM,
Post: #4
|
|||
|
|||
RE: reset ista short circuit fault?
|
|||
17-10-2022, 19:07 PM,
Post: #5
|
|||
|
|||
RE: reset ista short circuit fault?
(17-10-2022, 17:26 PM)KEIN Wrote:(15-10-2022, 21:31 PM)yomismo 01 Wrote: hello What you mean in reset? Ista can delete error on e series too but problem must be solved. Is reset something different? |
|||
18-10-2022, 13:26 PM,
(This post was last modified: 18-10-2022, 13:40 PM by KEIN.)
Post: #6
|
|||
|
|||
RE: reset ista short circuit fault?
(17-10-2022, 19:07 PM) bmwlover Wrote:(17-10-2022, 17:26 PM)KEIN Wrote:(15-10-2022, 21:31 PM)yomismo 01 Wrote: hello Eliminating the short circuit is not enough. The control unit has an error counter on each lamp, if the number of errors exceeds the allowable value, then the error cannot be deleted until the counter is reset. For series E - reset via Tool32 or other programmers; For F, G, I - there is a verification plan in ISTA. Reset blocking in case of short circuit: 1. Open Tools32 (C:\EDIABAS\Tools32.exe); 2. Open FRM_87.prg (for FRM1) or FRM_70.prg (for FRM2/FRM3) or LM60.prg/LM_e65.prg (for LM) or fem_20.prg/bdc.prg/bdc_g05.prg/bdc_g11.prg (for FEM/BDC/BDC2/); 3. Jobe "STATUS_LAMPEN_KURZSCHLUSS_COUNTER" and double click, in the result window to find the value equal to 50 (should be a lamp that no longer works); 4. Jobe "_RESET_KURZSCHLUSS_SPERRE" (FRM_87.prg = FRM1) or jobe "STEUERN_RESET_KURZSCHLUSSABSCHALTUNG" (FRM_70.prg = FRM2/3) and enter as an argument: 0xFF - This is the reset value of the error of all lamps; |
|||
Reputation: +1 - yomismo 01 [+1] | |||
19-10-2022, 07:33 AM,
Post: #7
|
|||
|
|||
RE: reset ista short circuit fault?
I've reset light module short circuits on ISTA.
|
|||
19-10-2022, 08:48 AM,
Post: #8
|
|||
|
|||
RE: reset ista short circuit fault?
(17-10-2022, 17:26 PM)KEIN Wrote:(15-10-2022, 21:31 PM) yomismo 01 Wrote: hello Do all modules have counters? What about eps? How to reset it? |
|||
19-10-2022, 14:15 PM,
Post: #9
|
|||
|
|||
RE: reset ista short circuit fault?
(19-10-2022, 08:48 AM)bmwlover Wrote:To find out modules reset function with ISTA.(17-10-2022, 17:26 PM)KEIN Wrote:(15-10-2022, 21:31 PM) yomismo 01 Wrote: hello 1. Run the vehicle test. 2. Select module from control units tree. 3. The reset function in diagnostic or activation “I recalled”. |
|||
Reputation: +1 - yomismo 01 [+1] | |||
19-10-2022, 17:13 PM,
Post: #10
|
|||
|
|||
RE: reset ista short circuit fault?
Hello
the 2013m5 user is right . There is a reset function in the tree below the control unit. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content