Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

GODIAG V600-BM Impressions
18-10-2022, 00:45 AM,
Post: #1
GODIAG V600-BM Impressions
Does anyone used the GODIAG V600 for ISTA / ISTA-P?
Very appropriate for feedback.

   
   
Quote this message in a reply
18-10-2022, 20:32 PM,
Post: #2
RE: GODIAG V600-BM Diagnostic and Programming Tool for BMW
Im using GODIAG V600 mit Ista 4.31(i do not have newer).I have tested it with E60,E39,F10,F20,E70 and F11. So far it works good with these cars and Inpa and NCSexper work also.But i only tested diagnosis, not programming. Service is not really good, i need some emails to get Software in English to register the Interface.On there homepage i only found chinese Software.
Quote this message in a reply
18-10-2022, 22:05 PM,
Post: #3
RE: GODIAG V600-BM Diagnostic and Programming Tool for BMW
(18-10-2022, 20:32 PM)jegen Wrote:  Im using GODIAG V600 mit Ista 4.31(i do not have newer).I have tested it with E60,E39,F10,F20,E70 and F11. So far it works good with these cars and Inpa and NCSexper work also.But i only tested diagnosis, not programming. Service is not really good, i need some emails to get Software in English to register the Interface.On there homepage i only found chinese Software.

Thank you very much for the info. I did some search and found to register, you have to install the .exe file and everything in there. All info in the text file.
GODIAG V600-BM.txt
File Type: .txt
Downloaded: 18 times
Size: 262 bytes

Quote this message in a reply
[+] 2 users say Thank You to 2013m5 for this post
30-10-2022, 03:57 AM,
Post: #4
RE: GODIAG V600-BM Diagnostic and Programming Tool for BMW
(18-10-2022, 20:32 PM)jegen Wrote:  Im using GODIAG V600 mit Ista 4.31(i do not have newer).I have tested it with E60,E39,F10,F20,E70 and F11. So far it works good with these cars and Inpa and NCSexper work also.But i only tested diagnosis, not programming. Service is not really good, i need some emails to get Software in English to register the Interface.On there homepage i only found chinese Software.

How did you get to use with standard tools? I’ve tried all sorts of ways and never had any luck so I just threw it in the bottom drawer of my desk


Quote this message in a reply
30-10-2022, 04:16 AM,
Post: #5
RE: GODIAG V600-BM Diagnostic and Programming Tool for BMW
I was send an email to them, and they on tested with ISTA 4.36.30. I ordered one to use with my old cars. It’s arriving on next Friday, and I’ll test/post the feedback.
Quote this message in a reply
31-10-2022, 05:00 AM,
Post: #6
RE: GODIAG V600-BM Diagnostic and Programming Tool for BMW
(30-10-2022, 03:57 AM)martinez9049 Wrote:  
(18-10-2022, 20:32 PM)jegen Wrote:  Im using GODIAG V600 mit Ista 4.31(i do not have newer).I have tested it with E60,E39,F10,F20,E70 and F11. So far it works good with these cars and Inpa and NCSexper work also.But i only tested diagnosis, not programming. Service is not really good, i need some emails to get Software in English to register the Interface.On there homepage i only found chinese Software.

How did you get to use with standard tools? I’ve tried all sorts of ways and never had any luck so I just threw it in the bottom drawer of my desk
I use it like normal Icom. I change setting with easyconnect
Remote-ip of V600-Obd_ab625, then i Reserve V600 with Itool Radar
Quote this message in a reply
31-10-2022, 13:28 PM,
Post: #7
RE: GODIAG V600-BM Diagnostic and Programming Tool for BMW
(31-10-2022, 05:00 AM)jegen Wrote:  
(30-10-2022, 03:57 AM)martinez9049 Wrote:  
(18-10-2022, 20:32 PM)jegen Wrote:  Im using GODIAG V600 mit Ista 4.31(i do not have newer).I have tested it with E60,E39,F10,F20,E70 and F11. So far it works good with these cars and Inpa and NCSexper work also.But i only tested diagnosis, not programming. Service is not really good, i need some emails to get Software in English to register the Interface.On there homepage i only found chinese Software.

How did you get to use with standard tools? I’ve tried all sorts of ways and never had any luck so I just threw it in the bottom drawer of my desk
I use it like normal Icom. I change setting with easyconnect
Remote-ip of V600-Obd_ab625, then i Reserve V600 with Itool Radar

Huh, ok well I could use it just fine with ISTA but it wouldn't work with standard tools. I guess I'll give it another shot.


Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  GODIAG Diagnostic Tool for BMW serhion 12 1,898 06-10-2022, 11:48 AM
Last Post: XMarus

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content