[melkon84]

Hello friends I purchased a 2007 Dodge Sprinter with missing EIS, how can I obtain original EEPROM and FLASH to use it on used EIS, I don't know the original part number. I have VVDI PROG, VVDI MB TOOL, VVDI2, CGDI MB, CGDI PROG, Mercedes Star 4, MBE-KR55, Yanhua Digimaster 3 Digimaster III Odometer Correction Master V1.8.2203.30, V54 FGTech Galletto 4 Master 0475, CARPROG FULL V10.93 Blue Interface, Kess, Ktag. I can make ECU virgin with CGDI MB but i can't do it to EIS cuz it's a blade key. I read that I have to reset cluster to zero and input millage to EIS and sync them to show correct millage this is when I have original EEPROM and FLASH. Any help greatly appreciated. VIN-# WD0PE745675143392. I'm a Locksmith.

---

Also do i need to virginize the ESL or no, if yes, what tool does that? or just buy emulator?

[MahoJohn]

Hello friends I purchased a 2007 Dodge Sprinter with missing EIS, how can I obtain original EEPROM and FLASH to use it on used EIS, I don't know the original part number. I have VVDI PROG, VVDI MB TOOL, VVDI2, CGDI MB, CGDI PROG, Mercedes Star 4, MBE-KR55, Yanhua Digimaster 3 Digimaster III Odometer Correction Master V1.8.2203.30, V54 FGTech Galletto 4 Master 0475, CARPROG FULL V10.93 Blue Interface, Kess, Ktag. I can make ECU virgin with CGDI MB but i can't do it to EIS cuz it's a blade key. I read that I have to reset cluster to zero and input millage to EIS and sync them to show correct millage this is when I have original EEPROM and FLASH. Any help greatly appreciated. VIN-# WD0PE745675143392. I'm a Locksmith.

---

Also do i need to virginize the ESL or no, if yes, what tool does that? or just buy emulator?

hi,

for original part number you need to call by mercedes/dodge directly,

[melkon84]

This are the eeprom files i have, one i extracted from original ecu, other one is the used EIS that i made key to, can someone create eeprom file with correct vin and 210,000 mile? I will try to read the cluster eeprom and post as well.

[melkon84]

Original EIS part number 68023969AA

[melkon84]

I modified the vin, and supposedly renewed the EIS, can someone verify and see if i did it right? Thanks in advance

[melkon84]

Another forum member helped me get my van up and running, new eeprom and after virginizing the engine ecu, uploading the eeprom to EZS/EIS, made new key, married the ecu to the van now everything works perfect.