Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

adding gps connector to nbt evo
22-10-2022, 13:22 PM,
Post: #1
adding gps connector to nbt evo
since this information got lost a while back,did someone manage to get to bottom of what it takes to make this work?
Quote this message in a reply
22-10-2022, 13:39 PM,
Post: #2
RE: adding gps connector to nbt evo
i think u want put port GPS to EVO without that ?
Quote this message in a reply
22-10-2022, 13:40 PM,
Post: #3
RE: adding gps connector to nbt evo
yes,we had a thread a while back but i guess it got deleted or was lost when the forum was down.
Quote this message in a reply
23-10-2022, 11:53 AM,
Post: #4
RE: adding gps connector to nbt evo
Solder the gps chip, the gps port on the mainboard. Then enable gps by adjusting adjblock

- Secure coding (NCD 2.0) fit to FA changed (Typschlussel, Serie, Region...).
- ID8.5 (SFA) conversion/ change region map.
- Virgin Kafas4, MRR, RAM used.
- Mgu patch, fsc custom match to vin, remove CP.
- Reset ISN 7DTC, 8HP for F, G serie (include EGS7).
- Write ISN MG1/MD1 with remotely.
- Carplay/Android Auto MGU with/without ATM (6AE).
Skype live:laquangksxd
Quote this message in a reply
12-11-2022, 12:30 PM,
Post: #5
RE: adding gps connector to nbt evo
"Then enable gps by adjusting adjblock"

how would one do this bit please?
Quote this message in a reply
31-12-2022, 13:09 PM,
Post: #6
RE: adding gps connector to nbt evo
i believe the hutool will let you enable that. not sure if theres way to do it manually via esys
Quote this message in a reply
31-12-2022, 14:28 PM,
Post: #7
RE: adding gps connector to nbt evo
The issue is that many attempted to put GPS chip and failed. I know several cases where they tried with ublox lea-6h/r chips and it never worked, even with adjblock configured correctly.

Maybe the solution is to find out which chip is the correct one.

EntryNav2, MGU, Evo - carplay with or without ATM, full fsc, component protection and more.
NCD 2.0 secure coding - typeschlussel (typecode) change, region change
under Press rep & thanks if I you found this useful. PM if you need more help.
Quote this message in a reply
31-12-2022, 15:18 PM,
Post: #8
RE: adding gps connector to nbt evo
I tried to install the gps module from china several times, with no positive result
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 671 25-03-2024, 08:11 AM
Last Post: Node
  Part number 34 pin connector MQS (b&o amplifier) ruben_17non 3 215 04-03-2024, 12:49 PM
Last Post: xDrive
  Part number connector EGS ruben_17non 6 482 21-11-2023, 10:21 AM
Last Post: 2013m5
  Entrynav2 Wifi connector retrofit BimmerSLO 6 660 10-11-2023, 22:44 PM
Last Post: jaramillo
XZBMW BMW part number for connector contact Vojno 4 556 03-10-2023, 08:22 AM
Last Post: schaeublew
  G11 G12 LCI rear light in trunk adding fog light on Us lamp kklobo 0 176 16-09-2023, 19:44 PM
Last Post: kklobo
XZBMW connector wanted Vojno 9 744 18-05-2023, 08:32 AM
Last Post: Vojno
XZBMW HU-ServiceManager. Adding new maintenance is at the top of the list, not down. TIGHTFIN 4 813 01-05-2023, 19:24 PM
Last Post: Ibrahim24
  Please i need refference of 6 pin connector (foot light led) ruben_17non 4 431 11-04-2023, 13:02 PM
Last Post: Vojno
  Idiots guide to adding programming data? GoNz0- 10 1,049 10-03-2023, 17:45 PM
Last Post: GoNz0-

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content