[DavidForgac]

Write eeprom Try and Report.

First, let's start, then we will deal with DPF off.

[darckreign1984]

Write eeprom Try and Report.

First, let's start, then we will deal with D

Where to flash this? 
On dde Bosch. Or BSI? 
Thanks

[DavidForgac]

Write eeprom Try and Report.

First, let's start, then we will deal with D

Where to flash this? 
On dde Bosch. Or BSI? 
Thanks

Write eeprom to Engine ecu
You did not post the eprom dump from BSI.

[darckreign1984]

Write eeprom Try and Report.

First, let's start, then we will deal with D

Where to flash this? 
On dde Bosch. Or BSI? 
Thanks

Write eeprom to Engine ecu
You did not post the eprom dump from BSI.

I did not make a backup to BSI.

Ok to flash to ecu the file from you, i have to use a different programmer or? I can use ktag? And same pinout used to backup?

Thanks for help again

[raffy haddad]

Usually best with the tool you read with

[darckreign1984]

- i wil try to write the file for immo off, after i have the password for the arhive

Thanks

[DavidForgac]

Check private messages. You have the password there.

[darckreign1984]

Thanks.
Tried your solution, not working.


When I try to start car, the error appear again - coded anti-start

---

Did not work.

To bad

---

Not working. Thanks again

[al70]

any fault codes ?

[darckreign1984]

Engine fault - coded anti - start

---

I don't have a number code .

---

Error posted in first post - shared in picture