[azahaf]

Hello everyone,

I don't know if it was mentioned here before, I searched for it with no result.

If you ordered driving assistant you also have the steering wheel heating, doesn't matter if you bought it at the beginning. Checked with f10, f20 and f90
So if you want to give yourself a little upgrade, you can enable your steering wheel heating for 150€ for the f10 (done this today with coding and everything is working fine)

Unfortunately the guide is in german, but you can translate this with google translator

Link is attached in the notefile

[pepsicola]

I know there's a guy that find out a lot of the m140i if not all of them came with the heated steering wheel but no heated function. He made a switch and did some coding to activate it, works good.

[donke]

I've done this a few months ago on a F31. Worked perfectly.
I've only bought the steering-wheel housing (the lower plastic part of the steering wheel-base cover) and the steering-heating-button.

The new parts were around 100€ in Germany.
Coding and installing was really easy. So the upgrade is worth it.

Part-Numbers for F31 LCI:
61316823468 - Cover
61319384363 - Button

[Pioner230]

to retrofit the heated steering wheel on the f series, you need to extend the power to the steering wheel cable, and replace the cable if you don’t have steering wheel vibration, for example, and deliver the button itself and replace the lower decorative trim under the steering wheel, and code the fem body and nbt. On the G series, everything is simpler button heating the steering wheel on the steering wheel itself, you only need to change the steering wheel and hold on to the wires, if there are assistants, you don’t need to reach anything, just encode nbt and bdc, it happens when the wire is pulled from the cable to the socket on the right side of the dashboard where the airbeg switch is, before the wire socket is after there is no socket) you need to reach out and also replace if there are no assistants steering cable

[Dany]

I also did it on my F30, I had only to buy the switch and the lower housing and then a little coding, it works very well! If I can find how to adjust the heating temperature it would be nice too!

[Pioner230]

I also did it on my F30, I had only to buy the switch and the lower housing and then a little coding, it works very well! If I can find how to adjust the heating temperature it would be nice too!

There is no temperature adjustment, since a command is simply sent from szl to turn on the heating, I know that the temperature can be selected for the seats for each mode, and yes, the temperatures in Europe and the USA are different, in the USA it is hotter. P. S. put thanks if not difficult and reputation

[ruben_17non]

i have problem with buttom.
short circuit led.

i can try with standard switch or original have any resistance??