[rana]

F30 FEM flashing problem

i am trying to flash FEM and FEM_GW but when i calcolate the SVT i got black list 
how to fix that please 
thank you

[jaramillo]

Based on image, its at last ilevel

[matas55]

your psdz is old,but you can reflash existing sw if need

[juantg93]

Using the pszdata you have, the fem modules are already at their latest version. You can try using more recent data, but I don't think they have an update. Why do you want to update them?

[rana]

Using the pszdata you have, the fem modules are already at their latest version.  You can try using more recent data, but I don't think they have an update.  Why do you want to update them?

FEM replaced with used one ISN fixed but most of the moudules are in red so i want to flash FEM and FEM_GW

[TheNine90]

Check the FA if its correct

---

Which modules specifically?

[huzefa]

Using the pszdata you have, the fem modules are already at their latest version.  You can try using more recent data, but I don't think they have an update.  Why do you want to update them?

FEM replaced with used one ISN fixed but most of the moudules are in red so i want to flash FEM and FEM_GW

you can change the i-steb(target ) and calculate the SVT TARGET and flash it 
after that you can flash it agine to the (F20-22-03-540) but be sure about you FA IS correct FOR THE CAR

[Siki78]

Using the pszdata you have, the fem modules are already at their latest version.  You can try using more recent data, but I don't think they have an update.  Why do you want to update them?

FEM replaced with used one ISN fixed but most of the moudules are in red so i want to flash FEM and FEM_GW

Is your flexray port open or close check with tool32? Did you write svt to vcm? If you want to flash then in svt_ist all swfl,btld,cafd change to 000 and calculate tal. Do not change hwap and hwel

[rana]

Read SVT before TAL execution started.

TAL execution started.
[] use default timing parameters as an exception occured [WARN]
[] - [Exception - FEM_GW_10_ETHERNET] openECUConnection for link FEM_GW_10_ETHERNET failed with error MCDError Severity: 2051, Error Code: 49184, Description: Object with name not found, Vendor Code: 3, Vendor Description: provided name FEM_GW_10_ETHERNET doesn't map to an item
ExecutionID=2022/10/27-14:53:01.255
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] null [THROWABLE]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForFlash started [PROGRESS]
[] prepareVehicleForFlash finished [PROGRESS]
[] ECUId:FEM_GW_0x10 not accessible cause ECU properties could not be determined from ODX data (e.g. ECU doesn’t exist in current project). [WARN]
[FEM_GW - 10] ECUId:FEM_GW_0x10 not accessible cause ECU properties could not be determined from ODX data (e.g. ECU doesn’t exist in current project). [THROWABLE]
[] finalizeVehicleFlash started [PROGRESS]
[] finalizeVehicleFlash finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] Finalization of TAL execution failed with exception [WARN]
[] - [Exception] negative response error:
code: exception in job
description: MCDException in Job MCD3_FinalizeTALExecution, Context: service ReadDataByIdentifier ActiveDiagnosticSession, Type: com.bmw.prodias.exceptions.mcd.ParameterizationException, Message: Code=49184, CodeDescription='Object with name not found', Severity=2051, VendorCode=3, VendorCodeDescription='provided name HU_ENTRY_63_ETHERNET doesn't map to an item', [Severity=2051][ErrorCode=49184][ErrorCodeDescription=Object with name not found][VendorCode=3][VendorCodeDescription=provided name HU_ENTRY_63_ETHERNET doesn't map to an item]
severity: ERROR

[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "AbortedByError". [C207]
TAL execution finished. Duration: "11s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.

---

Using the pszdata you have, the fem modules are already at their latest version.  You can try using more recent data, but I don't think they have an update.  Why do you want to update them?

FEM replaced with used one ISN fixed but most of the moudules are in red so i want to flash FEM and FEM_GW

Is your flexray port open or close check with tool32? Did you write svt to vcm? If you want to flash then in svt_ist all swfl,btld,cafd change to 000 and calculate tal. Do not change hwap and hwel

can explain more about open and close ports by tool32 . how to do

[Enabled]

I wouldn't change the flash if it is black when calculating. Code FEM to car, then write in the correct VCM (calculated SVT write to VCM) and then sync flexray.

Reset the gateway (or battery disconnect) if needed to gain connection again.