Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA can't identify vehicle
31-10-2022, 16:21 PM,
Post: #1
|
|||
|
|||
ISTA can't identify vehicle
Hello,
I have an issue with ISTA not identifying a vehicle. ISTA is v4.37.30 from Sedoy. I'm using ENET cable and it works fine as I can use FeatureInstaller and ZGW_search also finds the vehicle. ISTA connection manager also shows the vehicle but when I try to connect, it goes on identifying for minutes, then asks to manually enter VIN and ultimately fails to identify. PAD is active. I will also post pictures of error, connection manager and ZGW search. Thanks |
|||
31-10-2022, 16:26 PM,
Post: #2
|
|||
|
|||
RE: ISTA can't identify vehicle
Change at ediabas settings to enet and autodetect, then at ista use ediabas
|
|||
Reputation: +1 - Raimo5 [+1] | |||
31-10-2022, 21:13 PM,
Post: #3
|
|||
|
|||
RE: ISTA can't identify vehicle
|
|||
31-10-2022, 23:26 PM,
Post: #4
|
|||
|
|||
RE: ISTA can't identify vehicle
TCP...
Also change at ista the connection to point to ediabas... and done |
|||
01-11-2022, 13:21 PM,
Post: #5
|
|||
|
|||
RE: ISTA can't identify vehicle
|
|||
01-11-2022, 14:07 PM,
Post: #6
|
|||
|
|||
RE: ISTA can't identify vehicle
(01-11-2022, 13:21 PM)willisodhiambo Wrote:(31-10-2022, 23:26 PM)jaramillo Wrote: TCP... Yes... just try... I have faced same situation of OP. This is a different aproach to solve the issue use Enet at ediabas with TCP 6801, not XEthernet |
|||
01-11-2022, 17:47 PM,
Post: #7
|
|||
|
|||
RE: ISTA can't identify vehicle
You might want to use Ediabas Konfigurator to set the connection right.
Click Thanks and Reputationif this post helped you.
|
|||
Reputation: +1 - Raimo5 [+1] | |||
01-11-2022, 22:43 PM,
Post: #8
|
|||
|
|||
RE: ISTA can't identify vehicle
Thanks everyone. I'll give these suggestions a try in a couple of days when I have time. Will report back with findings.
|
|||
01-11-2022, 22:47 PM,
Post: #9
|
|||
|
|||
RE: ISTA can't identify vehicle
Totally agree that the EDIBIAS configurator is the best bet. This is the easiest way... be aware there are two different ENET options, I can't remember what they are but I'm pretty sure one says ENET ICOM or something. If one doesn't work try the other one.
|
|||
02-11-2022, 05:57 AM,
Post: #10
|
|||
|
|||
RE: ISTA can't identify vehicle
(01-11-2022, 14:07 PM)jaramillo Wrote:(01-11-2022, 13:21 PM)willisodhiambo Wrote:(31-10-2022, 23:26 PM)jaramillo Wrote: TCP... Id like to try this. Give details. Interface ediabas, in ista also ediabas. What else do we change in the ediabas.ini file? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content