[jaramillo]

I have no idea why that is so hard to find. It was used for quite some time in a plethora of iLevels (see attachment).

can You do the same for G20 for FLM2 ?
SWFL_00005CFB_100_004_070

Inject cafd for swe don't work because no cafd for base variant is found.
I am using 4.37.20 psdzdata, in older version don't working either.



thanks

First flash.....

[yomismo 01]

This is your custom tool for KIS I assume ?

Yes.

what tool is that?

[RaoulK1998]

I have no idea why that is so hard to find. It was used for quite some time in a plethora of iLevels (see attachment).

can You do the same for G20 for FLM2 ?
SWFL_00005CFB_100_004_070

Inject cafd for swe don't work because no cafd for base variant is found.
I am using 4.37.20 psdzdata, in older version don't working either.



thanks

Flash first, or check other side FLM CAFD id, and then modify SVT to inject the CAFD if you dont want to/cant flash. i recommend flash, but i have used second method couple times for whatever reason

[Node]

I have no idea why that is so hard to find. It was used for quite some time in a plethora of iLevels (see attachment).

can You do the same for G20 for FLM2 ?
SWFL_00005CFB_100_004_070

Inject cafd for swe don't work because no cafd for base variant is found.
I am using 4.37.20 psdzdata, in older version don't working either.



thanks

Same SWFL for ALL iLevels from S18A-21-03-500 to S18A-23-07-545. WHY do you want to inject CAFD to something which does NOT have CAFD??? Like in AT ALL.

---

Flash first, or check other side FLM CAFD id, and then modify SVT to inject the CAFD if you dont want to/cant flash. i recommend flash, but i have used second method couple times for whatever reason

And WHAT then??? Unit will magically accept CAFD when it is NOT supposed to have one?

[RaoulK1998]

I have no idea why that is so hard to find. It was used for quite some time in a plethora of iLevels (see attachment).

can You do the same for G20 for FLM2 ?
SWFL_00005CFB_100_004_070

Inject cafd for swe don't work because no cafd for base variant is found.
I am using 4.37.20 psdzdata, in older version don't working either.



thanks

Same SWFL for ALL iLevels from S18A-21-03-500 to S18A-23-07-545. WHY do you want to inject CAFD to something which does NOT have CAFD??? Like in AT ALL.

---

Flash first, or check other side FLM CAFD id, and then modify SVT to inject the CAFD if you dont want to/cant flash. i recommend flash, but i have used second method couple times for whatever reason

And WHAT then??? Unit will magically accept CAFD when it is NOT supposed to have one?

I tried, and it works, i dont know why but I was curious. Obviously I would flash it normally.

The reason was we do remote diagnostics (all brands with our own OBD device) and ENET did not work yet, so in order to help people with G20/G30 that had new headlight I would download Left side CAFD using BMW Explorer, that works through canbus, and write that cafd to empty Right side (if thay was replaced side) and 7/10 times I would say it accepted the coding, and I could do Data Matrix settings with ISTA.

Now we got ENET sorted in our software and I can flash/code with esys as intended, but as a test I tried to do the same thing by manipulating the SVT, and sometimes it works