Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
cas4 zgw test bench
04-11-2022, 21:47 PM,
Post: #1
|
|||
|
|||
cas4 zgw test bench
Running into a weird issue.
I have made a bench test with a cas4(auto trans,no elv required) and a zgw-02 high(has most port as well) I have the ring aerial connected,the start button,can2 between zgw and cas,power connected ground connected. the cas i bough came without a key,so i made a new one. Here is where the funny stuffs happens. I know when the cas and zgw turn on because the start button light comes on and zgw most light comes on. But after 10-15 seconds it switches off and i press the start button it turns on again for 10-15 seconds and back off. Also the cas doesnt want to learn the new key. Its like the cas doesn't turn on properly and quickly turns off. To make things even more strange,i can connect with esys and see the modules as long as i keep pressing the start button so the cas and zgw stay awake. What am i missing because this is driving me nuts. |
|||
04-11-2022, 21:52 PM,
Post: #2
|
|||
|
|||
RE: cas4 zgw test bench
Use a can ignition emulator... Issue will be solved
|
|||
04-11-2022, 21:58 PM,
Post: #3
|
|||
|
|||
RE: cas4 zgw test bench
|
|||
05-11-2022, 07:05 AM,
Post: #4
|
|||
|
|||
RE: cas4 zgw test bench
Update : Everything is working now.
No idea where the issue was. I connected kombi and everything started working. Just to test even more,i disconnected kombi and everything is still working as intended |
|||
05-11-2022, 07:29 AM,
Post: #5
|
|||
|
|||
RE: cas4 zgw test bench
Next time just check your wiring and 15wup connection, this keep ecus alive when ignition is turned on
|
|||
05-11-2022, 08:33 AM,
Post: #6
|
|||
|
|||
RE: cas4 zgw test bench
(05-11-2022, 07:29 AM)kimz Wrote: Next time just check your wiring and 15wup connection, this keep ecus alive when ignition is turned on believe me i checked and verified everything before posting...no idea what happened first time...it just wouldnt learn the remote until i had the kombi connected as well. |
|||
10-11-2022, 08:38 AM,
Post: #7
|
|||
|
|||
RE: cas4 zgw test bench
(04-11-2022, 21:47 PM)brag288 Wrote: Running into a weird issue. hi for bench setup what do we need exactly? CAS4 ZGW(any?) JBBFE (any?), Cluster + start stop und ign do we need more? what about the pinout ? thks |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Tool for bench read 8hp | Garryq | 9 | 1,568 |
26-03-2024, 09:32 AM Last Post: skywoker |
|
Bosch MEVD172H bench backup | mrproper | 1 | 249 |
23-03-2024, 18:43 PM Last Post: Ratnik1990 |
|
ENAV2 bench activation | Airbus | 10 | 799 |
25-02-2024, 08:17 AM Last Post: jb2005 |
|
CAS4 Removed Capacitor for VVDI Prog | Rajco | 5 | 354 |
14-02-2024, 19:32 PM Last Post: Jumper |
|
Motronic 3.3.1 bench | jaramillo | 3 | 174 |
13-02-2024, 05:12 AM Last Post: 2013m5 |
|
Problem with cas4+ and Key ADD with VVDI | budddyyy | 11 | 693 |
10-02-2024, 07:23 AM Last Post: body1982 |
|
Dde Coding/flash with esys in bench? | ruben_17non | 0 | 183 |
08-02-2024, 21:28 PM Last Post: ruben_17non |
|
Entrynav2 - Trying to Trigger Component Protection on Bench | 2002JCW | 5 | 465 |
30-01-2024, 16:44 PM Last Post: DEJMIEN |
|
NBT display on bench without unit | djordan | 4 | 324 |
15-01-2024, 08:08 AM Last Post: Powerlab |
|
cas / cluster bench setup | Cniksor | 103 | 23,832 |
09-01-2024, 09:43 AM Last Post: MIKUr1 |
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Return to TopReturn to Content