[jassoyer]

Hello, folks after struggling to resolve this I come humbly to ask for help .... Have a 2012 Toyota Avanza 1.5 with Daihatsu immo box 89760-b0050. How does one go about Immo replacement on one of these vehicles please. Have tried making the Immo virgin using data from another avanza ''SET". Key light stays bold and stays in programming mode, any adivice from the more experienced on the Forum please?

[raffy haddad]

Did you get full set data from other avanza ? Immo and key only not enough you need.ecu data

[jassoyer]

Yes I have, Hence not sure what I am missing/doing step wise incorrect, took the ecu data from 95c56 on ecu and immo 95c66 then make file virgin on emo for toyota G key for self learning, but cannot get vehicle to come out of programming mode. So yes, used full data set from another vehicle, vehicle seem happy with an ecu swap using this method, issue is the with the immo.

[raffy haddad]

Write the donor data to your car and clone donor key and start car
no need to make virgin
not sure if it can work on g chip but worth to try
regards

[jassoyer]

Thanks for the reply Raffy, tried this also, but unsuccessfully