Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ODIS ENGINERIING PROBLEM DURING INSTALLATION
18-11-2022, 11:58 AM,
Post: #11
RE: ODIS ENGINERIING PROBLEM DURING INSTALLATION
(18-11-2022, 09:10 AM)fantomel Wrote:  reset his windows means restore from recovery partition. that install is stuck so better to find the log and see where it's stuck or as our colegue did , restore from recovery or reinstall.

Hello Mr. Fantomel, I followed your suggestions ... I reinstalled Windows 11 PRO, with an image prior to the update to version 2H22, it is still the original Vas 6150C.

The result is the same. though I apply Mr. Justdiag's changes, and run the installer as administrator.

The installation always hangs in the Driver installation phase, because I noticed that part of the package in the C:\Progrmadata\... folder is installed, while the one in the C:\Programfiles\... folder is not completed, until it completes the driver installation phase.

I must assume that I am forced to install the O.S. on the VAS 6150C. Windows 10 Pro.



Are there any alternative solutions?



Thanks for your advice
Quote this message in a reply
19-11-2022, 00:14 AM,
Post: #12
RE: ODIS ENGINERIING PROBLEM DURING INSTALLATION
(18-11-2022, 11:58 AM)psalva18 Wrote:  Are there any alternative solutions?
Hi again.............
Can you tell us why you want and you fight so much and with this passion to install on Panasonic VAG specific computer the W11??????
I guess you know that anyway latest ODIS-S 10/11 ODIS-E 15/16 not supported at all officially by W11...... Correct?????????[Image: thinking.gif]
The advice and best suggestion is: Install and use W10 and stop to killing yourself.........[Image: wink2.gif]
Regarts........beer
Reputation: +1 - Tadk [+1]
Quote this message in a reply
[+] 2 users say Thank You to vagvag for this post
10-02-2023, 11:48 AM,
Post: #13
RE: ODIS ENGINERIING PROBLEM DURING INSTALLATION
For me, he has pulled through the installation, previously made no update of Windows.
What amazes me is that we seem to be the only ones with the problem so far.
Which manufacturer is your notebook from?
Quote this message in a reply
12-02-2023, 19:55 PM,
Post: #14
RE: ODIS ENGINERIING PROBLEM DURING INSTALLATION
I had this problem on a W11 laptop.

Open taskmanager, you will see the process with the install setup (not the Odis Engineering Process!). If you expand that process, you will also see a CMD process. Kill that process and it will go further, then again it comes back. Kill it again. You will need to do this a couple of times and then the installation will go through.
Quote this message in a reply
15-02-2023, 10:09 AM,
Post: #15
RE: ODIS ENGINERIING PROBLEM DURING INSTALLATION
Same, just end proces registry tool from task manager when it stops. It will execute next proces, if it stop again end registry tool from task manager. And best to have uninstalled VAS drivers from Control panel and programs... wink
wink


Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
0Scope ODIS-Service 7.2.1 Postsetup 4220 (test) Tadk 1,065 102,255 7 hours ago
Last Post: dachCAR
  ODIS-Service_update_23_0_1-EU_20240418_Postsetup_230001.105.1350_test Tadk 315 19,766 11 hours ago
Last Post: JoZerByte
ZBentley ODIS Service 11.0.1 + Activations justdiag 110 9,820 Yesterday, 20:37 PM
Last Post: Stig33
ZSeat 5Q0909144R problem with seat Leon Merolino 0 24 Yesterday, 10:38 AM
Last Post: Merolino
00Windows ODIS-Service 6.2.0 Postsetup 4220 (test) Tadk 187 13,608 21-04-2024, 11:27 AM
Last Post: Tomey
  ODIS engineering passthru install sanil 3 163 17-04-2024, 20:20 PM
Last Post: vagvag
Lamborghini ODIS Service 23.2.2 + Activations justdiag 62 4,667 15-04-2024, 08:41 AM
Last Post: justdiag
0Scope ODIS-Engineering 12.2 Postsetup 1060 (test) Tadk 263 34,439 14-04-2024, 07:56 AM
Last Post: RitterDussel
ZVW Odis Engineering 14 + Activations fantomel 346 40,043 13-04-2024, 23:40 PM
Last Post: ch0ngin
ZTAudi ODIS E 18 help making patch jkraemer0485 2 477 11-04-2024, 09:36 AM
Last Post: justdiag

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content