[GoNz0-]

Been asked to have a look at a manual conversion. The guy had a mapper out who thought he could sort it, but the fan stayed on 100% like it did before the remap

The vin is WBANJ720X0B500760

The ZB of the DDE was 7811481
The chap who has done the swap thinks it needs to be 7802468 now

I have flashed it to 7802468 as it accepted the change, and the fan is now off until it's told to start so winner on that one, but ISTA still shows the car as an auto

He had already removed $205 from the FA and coded the car, I coded again to make sure and checked $205 was missing.

Pic of the ECU details attached as well.

Did he have the right ZB to convert the ECU to manual with ISTA?

I think ISTA showing auto is due to the vin and can't be changed?

Thanks.

[Jynkky]

If car runs ok and everything works now, dont mind of ista. it does not matter.
You write new fa to CAS and LM?

[GoNz0-]

If car runs ok and everything works now, dont mind of ista. it does not matter.
You write new fa to CAS and LM?

Yes, double checked that side of things, and the fan stopped sitting at 100% since moving ZB's