Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA Passthru set-up and EDIABAS ports for SM2
18-11-2022, 15:47 PM,
Post: #1
XZBMW  ISTA Passthru set-up and EDIABAS ports for SM2
Hi All,

Since I dont fully understand how EDIABAS.ini works I would like to seek your advice on modification of this file to make it work with ScanMatik 2 PRO and ISTA.

What I'm running is BMW StandardTool EDIABAS. Then I install BMW-PassThruD-3.0.11.86 and driver for SM2. Simple configuration of PTD and then I copy this into C:/EDIABAS folder without overwriting existing files. EasyConnect configured as STD:PassThruD. 

Effects are:


1. On this file - EDIABAS - original from BWM StandardTools

I launch ISTA and no connection to car on EDIABAS or Passthru Tool(J2345)

2.On this file EDIABAS - working with PTT

I launch ISTA on Passthru Tool(J2345) and everything works perfectly fine.

Is assume that port for TCP is incorrect between those two files. On first one STD is on 6801 and second one for PTD is 6408.

Is there a way to setup ediabas.ini to recognize "STD:PassThruD" and use port 6408 and for STD:OBD 6801 ?


Attached Files
EDIABAS - working with PTT.rar
File Type: .rar
Downloaded: 98 times
Size: 307 bytes

EDIABAS - original from BWM StandardTools.rar
File Type: .rar
Downloaded: 65 times
Size: 4.32 KB

Reputation: +1 - bulletvip [+1]
Quote this message in a reply
[+] 3 users say Thank You to diagso for this post
20-11-2022, 14:04 PM,
Post: #2
RE: ISTA Passthru set-up and EDIABAS ports for SM2
Just to close the topic and for future reference/users. Testing platofrm: ISTA 4.37 and BMW-PassThruD-3.0.11.86 along with newest SM2 drivers.

ScanMatik 2 PRO works fine with ISTA via option connection "Passthru Tool(J2345)" and reads the voltages and so on. Havent tried flashing anything, but think I should work just fine as well. 

On EDIABAS setting it also communicates but obviously no V display.

Only way I was able to make it work was to replace ediabas.ini that I have attached.

Cheers
Quote this message in a reply
[+] 1 user says Thank You to diagso for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  ista 4.46 Standalone kiranabc 33 2,993 5 hours ago
Last Post: Siki78
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,648 627,636 7 hours ago
Last Post: Sedoy
  ista for use whit vcx se db8000 0 37 10 hours ago
Last Post: db8000
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 356 Yesterday, 10:39 AM
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,330 27-03-2024, 20:02 PM
Last Post: Node
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,461 27-03-2024, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 126 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 161 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW G30 Flexray ports will not open! armenh7 6 291 25-03-2024, 18:35 PM
Last Post: Siki78
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 668 25-03-2024, 08:11 AM
Last Post: Node

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content