Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
i3 10.25" CID upgrade ENTRYNAV2
22-11-2022, 10:20 AM,
Post: #1
|
|||
|
|||
i3 10.25" CID upgrade ENTRYNAV2
Hi all,
Has anyone managed to successfully upgrade the LCI I3 with ENTRYNAV2 to the KYOCERA 10.25" CID? I have tried all the options I can find but still get a "No Signal" error Any help is greatly appreciated |
|||
22-11-2022, 15:29 PM,
Post: #2
|
|||
|
|||
RE: i3 10.25" CID upgrade ENTRYNAV2
HU_ENTRYNAV2 does not support a 10.25" screen. The maximum is 8.8".
|
|||
22-11-2022, 16:20 PM,
Post: #3
|
|||
|
|||
RE: i3 10.25" CID upgrade ENTRYNAV2
|
|||
22-11-2022, 17:17 PM,
Post: #4
|
|||
|
|||
RE: i3 10.25" CID upgrade ENTRYNAV2
|
|||
22-11-2022, 19:37 PM,
Post: #5
|
|||
|
|||
RE: i3 10.25" CID upgrade ENTRYNAV2
Okay then, why doesn't the 10.25" screen work after coding? I haven't found any thread online where someone states that the "basic" head unit works with 10.25".
I'd like to know myself (looking to replace the 6.5" screen for 10.25" in a G01 with HU_ENTRYNAV2). EDIT: I've found a thread on a german forum where someone said this: Display_Variant = breites Display CID Display Size: 10.25 Display Res: 1280x1480 CID_COM_MODE: spi The last line is important. |
|||
22-11-2022, 20:24 PM,
Post: #6
|
|||
|
|||
RE: i3 10.25" CID upgrade ENTRYNAV2
Thanks for the replies, that was the only thinh i didnt try! I presumed it had to be MII due to being a later screen, also some other posts are saying they are 1440x540 resolution on the 10.25"
|
|||
22-11-2022, 21:14 PM,
Post: #7
|
|||
|
|||
RE: i3 10.25" CID upgrade ENTRYNAV2
i3 LCI screen resolution is 1440x540
|
|||
22-11-2022, 21:37 PM,
Post: #8
|
|||
|
|||
RE: i3 10.25" CID upgrade ENTRYNAV2
(22-11-2022, 20:24 PM)mcrussell Wrote: Thanks for the replies, that was the only thinh i didnt try! I presumed it had to be MII due to being a later screen, also some other posts are saying they are 1440x540 resolution on the 10.25" Ignore the resolution that I wrote (that was for a different car), did "CID_COM_MODE -> spi" work? |
|||
22-11-2022, 22:56 PM,
Post: #9
|
|||
|
|||
RE: i3 10.25" CID upgrade ENTRYNAV2
Cant connect to the car atm, will try tomorrow & report back
|
|||
22-11-2022, 22:59 PM,
Post: #10
|
|||
|
|||
RE: i3 10.25" CID upgrade ENTRYNAV2
I3 EntryEvo does not support Kyocera 10.25 display.
As always, people write with no idea of ever having tested all 10.25 display manufacturers. Only a few LG 10.25 displays are compatible with EntryEvo, including the F48, because the 10.25 LG display is used. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Return to TopReturn to Content