[DelphiTeknik]

Hi, I have Peugeot 307, 2006.I am trying to add a new remote , but the addition does not work, i tried a lot, the original remot work on the car. I tried a lot  and I replaced the Bsi and programmed it on the keys, the car starts, but I cannot add the second remot to the car. Any ideas?

[raffy haddad]

You need first to program new transponder and then add remote
remote can be added but need its own transponder id
regards

[DelphiTeknik]

You need first to program new transponder and then add remote
remote can be added but need its own transponder id
regards

Thank you for your reply. I tried that, but the car does not accept adding a new remot. And after I erased the remots from the car, now it does not accept even adding the original key.

[raffy haddad]

Maybe you have wait time with ign on
30 mn
regards

[zmann]

Seems you have two separated problems, BSI and remote key. 307 BSI of those years can be systematic problem !
Also still confuse, on every of any time of key programming all existing key+remotes data are erased first before new programming of the key(S) but you just having original key problem later on ?

- BSI: capture the image of BSI identification page
- The new remote key: where did you get them. Wrong remote type will never work. Put full details of it and better with the photo.

[DelphiTeknik]

Seems you have two separated problems, BSI and remote key. 307 BSI of those years can be systematic problem !
Also still confuse, on every of any time of key programming all existing key+remotes data are erased first before new programming of the key(S) but you just having original key problem later on ?

- BSI: capture the image of BSI identification page    
- The new remote key: where did you get them. Wrong remote type will never work. Put full details of it and better with the photo.

Thanks for your reply and trying to help me.

The car came to me to add a key to it, so I read the EEPROM file from BSI and successfully extracted the PIN code from it, then added a key like the original one, and after successfully adding the key, the device asked me to program the remote manually and I did like the instructions, but the new remote was not added and the original one was erased from the car.
I put a picture of the original and new remote in the attachments.
Regards

[zmann]

There is no problem on this type of BSI. What I can think now is only the newly obtained key is of wrong type.

If the new remote key is of PSA original and correct type but used before, you cannot just replace transponder! They need to be paired from factory.

[akli]

hello inject a virgin eeprom and do telecoding and it's good friend

and for the remote control there is fsk-ask

[DelphiTeknik]

hello inject a virgin eeprom and do telecoding and it's good friend

and for the remote control there is fsk-ask

Have you virgin eeprom for my peugeot 307 BSI 
FNR : 9651197680
VAL  E0 BSI J04-00
EEP   95160

[zmann]

hello inject a virgin eeprom and do telecoding and it's good friend

and for the remote control there is fsk-ask

Mate there is no fsk-ask for these types of remote, only OOK (ASK) !