Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ista Calculation of the measures plan
26-11-2022, 15:50 PM,
Post: #1
|
|||
|
|||
Ista Calculation of the measures plan
Hello
I get the following error message with the new ISTA version 4.37.30 when trying to carry out a software update "A fault occurred during calculation of the measures plan. The required programming is therefore not available. Please contact Technical Support." The last firmware from the ISTA package is on the ICOM, it is connected with a cable and all files to programming. Does anyone have an idea what the error is? Tanks |
|||
26-11-2022, 15:52 PM,
Post: #2
|
|||
|
|||
RE: Ista Calculation of the measures plan
|
|||
26-11-2022, 16:20 PM,
Post: #3
|
|||
|
|||
RE: Ista Calculation of the measures plan
|
|||
26-11-2022, 17:10 PM,
Post: #4
|
|||
|
|||
RE: Ista Calculation of the measures plan
have you tried it with a different vehicle or just the one car
|
|||
26-11-2022, 17:54 PM,
Post: #5
|
|||
|
|||
RE: Ista Calculation of the measures plan
|
|||
26-11-2022, 18:13 PM,
Post: #6
|
|||
|
|||
RE: Ista Calculation of the measures plan
well if its same issue on all cars then maybe try reinstalling, or maybe issue with the version u have so try a different version
|
|||
26-11-2022, 18:21 PM,
Post: #7
|
|||
|
|||
RE: Ista Calculation of the measures plan
|
|||
26-11-2022, 20:11 PM,
Post: #8
|
|||
|
|||
RE: Ista Calculation of the measures plan
Try a battery reset for at least 30 minutes, then try another new measure plan for software update
|
|||
28-11-2022, 02:11 AM,
Post: #9
|
|||
|
|||
RE: Ista Calculation of the measures plan
This was a known bug for 4.37.3x, see attached release notes. Battery reset is mentioned as a possible workaround.
|