[Diaginstall]

Hi friends please can you help me to do how to diagnose dialogue with an EDC17CP45 ECU, I did this assembly, but I cannot diagnose communicate with ecu on table with ecu master neither by enet nor by kdcan with inpa ista-d esys.

[Jumper]

You need a Gateway with FlexRay for this job

[Diaginstall]

You need a Gateway with FlexRay for this job

how to do it can you give me more explanation please thank you

[Jumper]

I am not investing my time for your convenience. You can find everything on the net, study the circuit diagrams or buy a box that supports this job

[Diaginstall]

please is there someone else who can explain to me how to do it or with what material please thank you in advance

[al70]

there's lots of info on the tube, here's 1 example

[Diaginstall]

please is there anyone else who can explain to me how to do it I have the ecu master and I have plugged in as in the images but I cannot diagnose the ECU, and in the video he speaks in English and I don't understand English sorry as of now I'm blocked thank you friends

[al70]

have you tried to connect inpa using just power, kline and can lines ?
if that doesn't work you will have to setup a test bench, you'll need
ecu, cas unit, cluster, frm unit, key reader and key, possibly more,  and of course a harness to connect them all together, you have to fool the ecu to think it's in the car

[Diaginstall]

but there is no k line for edc17cp45 ?

---

yes I plugged in like the first photo but nothing works neither inpa nor ista-d nor esys evac the cable enet kidney