[dule14786]

hello my friend a have problem Whit opel combo c glow plug on dashboard flashing when start the engine a meke dpf egr off 3 different solution davinci ecudecoder and file service but problem not solved

a make dpg reg whit original file glow plugs stop flashing but when start the motor again problem come back whit launch and autocom replace dpf and senzor whit opcom a think is not working a don have returned information success action opcom is HQclone



only dtc on orginal file i 1 senzor for dpf is broken/removed

do you have any suggestions or some solution for this shit



Opel Combo 1.3 16v CDTi Marelli MJD 602



Opel Vin Number: W0L0XCF2573020754

Opel Hardware Number: 55574590 RR

Marelli Hardware No: MAG 01246O2M06001

Marelli Sofware No: M06001

Engine Code: Z13DTJ



and a have attached org and dpf+egr off

[anto]

Hi buddy. you need to put the car back to original and complete the regeneration. only after having done this will you be able to write the file without the glow plug warning light coming out.

[SINSET]

hello my friend a have problem Whit opel combo c glow plug on dashboard flashing when start the engine a meke dpf egr off 3 different solution davinci ecudecoder and file service but problem not solved

a make dpg reg whit original file glow plugs stop flashing but when start the motor again problem come back whit launch and autocom replace dpf and senzor whit opcom a think is not working a don have returned information success action opcom is HQclone



only dtc on orginal file i 1 senzor for dpf is broken/removed

do you have any suggestions or some solution for this shit



Opel Combo 1.3 16v CDTi Marelli MJD 602



Opel Vin Number: W0L0XCF2573020754

Opel Hardware Number: 55574590 RR

Marelli Hardware No: MAG 01246O2M06001

Marelli Sofware No: M06001

Engine Code: Z13DTJ



and a have attached org and dpf+egr off

Try whis.

[dule14786]

Hi buddy. you need to put the car back to original and complete the regeneration. only after having done this will you be able to write the file without the glow plug warning light coming out.

thanks but a wrote that a make regeneration whit org file but same thing anyway thanks for your time

[elektronik13]

Hi buddy. you need to put the car back to original and complete the regeneration. only after having done this will you be able to write the file without the glow plug warning light coming out.

thanks but a wrote that a make regeneration whit org file but same thing anyway thanks for your time

you need to do a proper repair and everything will be fine without deleting anything

[dule14786]

hello my friend a have problem Whit opel combo c glow plug on dashboard flashing when start the engine a meke dpf egr off 3 different solution davinci ecudecoder and file service but problem not solved

a make dpg reg whit original file glow plugs stop flashing but when start the motor again problem come back whit launch and autocom replace dpf and senzor whit opcom a think is not working a don have returned information success action opcom is HQclone



only dtc on orginal file i 1 senzor for dpf is broken/removed

do you have any suggestions or some solution for this shit



Opel Combo 1.3 16v CDTi Marelli MJD 602



Opel Vin Number: W0L0XCF2573020754

Opel Hardware Number: 55574590 RR

Marelli Hardware No: MAG 01246O2M06001

Marelli Sofware No: M06001

Engine Code: Z13DTJ



and a have attached org and dpf+egr off

Try whis.

not good same thing glow plug is flashing

[SINSET]

With ori file, what error you have?

[dule14786]

only for dpf sensor