[dmajooo]

Hi guys

I used Davinci 28 for dpf egr off in PCR2.1 Passat B7
Car drive good but still lights dpf indicator
DTCs none
Read/write with Hexprog

Exist any solution ?? 

Thanks

[CichyTuned]

Have you reset the soot values with the interface in the ecu? If not do it. If it does not pass, upload ori soft, delete the adaptations and then upload if nothing lights up.

[modhigh98]

WINOLS MHPT (VW PCR - TEGR OFF _ DPF OFF - 03L906023FS) ) - SM2G0LD000000).rar
File Type:
Downloaded:	10 times
Size:	729.44 KB

Here you have manual solution EGR + DPF also DTC off for this. You can disconnect sensors from DPF. If you have DTC after disconnect EGR tell me and i will fix. 
Pass in PM ( rep + thks) .

[dmajooo]

Here you have manual solution EGR + DPF also DTC off for this. You can disconnect sensors from DPF. If you have DTC after disconnect EGR tell me and i will fix. 
Pass in PM ( rep + thks) .

1.write orig file
2.adaptation dpf 
2.write mode file

DPF indicator still lights 
without DTCs

[modhigh98]

Here you have manual solution EGR + DPF also DTC off for this. You can disconnect sensors from DPF. If you have DTC after disconnect EGR tell me and i will fix. 
Pass in PM ( rep + thks) .

1.write orig file
2.adaptation dpf 
2.write mode file

DPF indicator still lights 
without DTCs

Drive 10-20km ....

[aladinnu]

when u reset dpf only reset ash mass but not soot mass to. so..
1. write ori file, drive car make regen and soot mass will decrease
2.write mod and all will be ok.

[dmajooo]

Solved

After reflashing with ODIS-E I repeated DPF off and everything is OK

Thanks