[pompei]

Hello Folks,
I have delphi ds150e diagnostic reader, but i want to change injectors code but it don't work.
I read some problems about the diagnostic tool.
Can somebody give me some alternatives diagnostic tools that i can use.
Its mostly for a Mercedes Vito V6 year 2007.
Best regards.

[gcesare21]

you can use any diagnostic tool for injector coding.
pay attention to write the codes, you can swap the letters 0 with O, 5 with S ...1 with L example...

[pompei]

you can use any diagnostic tool for injector coding.
pay attention to write the codes, you can swap the letters 0 with O, 5 with S ...1 with L example...

gcesare21,
Thanks for your reply, but With delphi ds 150 it won't connect to my car.

[emifive]

Is your Delphi ds original or a clone? and what software are you using?

[pompei]

Is your Delphi ds original or a clone? and what software are you using?

Hi emifive;
Thx for your reply.
Its a clone, and use Delphi or autocom.
Best regards

[emifive]

Well you should from the start check if you have a single or double PCB. the for a car that old you can use Autocom 2013.3 which you will have no problem finding. Or you could get Autocom 2020.23.

[pompei]

Well you should from the start check if you have a single or double PCB. the for a car that old you can use Autocom 2013.3 which you will have no problem finding. Or you could get Autocom 2020.23.

Hello emifive,
I took pictures of the Delphi board, i dont now its single of double.
Best regards

[CATAHA]

[pompei]

Hello CATAHA,
I see in the video there is allot to renew, isnt not better to buy something els that have a nice price.
Best regards

[Probleemkind]

It looks like you have not solved your issue yet, ive coded injectors with Delphi before, the same one the 150d or s one. Seems to work just fine, might be on your installation end. Have you tried re-installing Delphi?