[betsesv]

As i mention after update the tech2 throw error!

[domelec]

Have you installed mce correctly?
are you programming the cards correctly?
i would have left 1 card as it was for testing
and only programmed 1 with newer bins then any errors put original card back and see if errors are still there or if it works.
if works then programming isnt working right
i use toughbook cf-29 with win xpsp3 and works great
also used dell d505 with xpsp3

[betsesv]

Mce end writting without error! Card writer too! Now iam waitting new one and i post every detail!

[betsesv]

My new card just arrive! Teste in a car with candi work fine!
I'll do some more car testing to be sure!
Probably writting cards with card writer destroy my old cards. My clone is not so good probably.
I'll buy and a new one to test writting only with MCE.

[domelec]

I only use mce as said before
i would keep retrying the old cards by reprogramming them again
what part of the world are you in?
im in the uk so if uk i am willing to test the cards for you if you want to cover cost of postage each way
if not in uk then could be too cost effective

[betsesv]

Greece my friend!
I have bought from uk (docvauxall) the gr bin file .
Next time i 'll write the card with 5.0V not card select with MCE.