[Xpepino]

Hello, i see on VCP for 3q0980654L ZDC files for increase time with LDW activated, to check hands on wheel to 60 seconds for Lane Departure Warning (LDW or HCA).
Is there any way to make it also on platform Audi A6 C8 ? Or make it via Adaptations ?
Also without traffic assist make LDW working from 0-20km/h (now it works aprox from 65km/h)
Also predictive ACC on this car, can have some range above maximal speed - perfect is change speed above maximum limit - is there any way to setup ?

In this Car is zFAS: 4KE907107AL
Also for Etron - there is zFAS 4K4907117G

Thx

[smin6675]

Do you have solution for B9 B9.5 A4 A5 as well?
I've been searching this issue for a long time but haven't found yet

[nirvananils]

For A6 C8 there will be never a Datatset Solution as Dataset use FDS.

In A4 B9 maybe it could be easier but you have to modify flash Dataset

[smin6675]

For A6 C8 there will be never a Datatset Solution as Dataset use FDS.

In A4 B9 maybe it could be easier but you have to modify flash Dataset

Oh it's going to be more tricky.
I've done 8W7907217 flashing for TSR, but have no idea to modify flash dataset haha

[masserata]

For A6 C8 there will be never a Datatset Solution as Dataset use FDS.

In A4 B9 maybe it could be easier but you have to modify flash Dataset

Oh it's going to be more tricky.
I've done 8W7907217 flashing for TSR, but have no idea to modify flash dataset haha

Can you give some information about TSR flash?

[unclassified]

The problem is in the steering rack as far as I know. Camera can be flashed to 60 seconds but steering rack also needs modification which isn't fixed yet.

[shadeslayer]

Any update on this? Just got new A6 C8, with LDW, and no assist just steering vibrations. Looking to have this and assist early set.