Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Install Xentry 2014
26-12-2022, 10:27 AM,
Post: #1
|
|||
|
|||
Install Xentry 2014
Hello I have big problem with install Xentry 07/2014. I read many post, try change newguide2j new key make and every time I have No valid authorization was found for XENTRY Diagnostics (AppId = 252/253).
A valid authorization must first be entered before an installation can be carried out. Setup is being terminated. I spend with this whored 3 days and 3 night but now I have no more strong and idea please help |
|||
26-12-2022, 10:37 AM,
Post: #2
|
|||
|
|||
RE: Install Xentry 2014
I don't remember that the key was necessary to be able to install it... What interface are you going to use and with what vehicles? Why do you want that version and not something more current?
|
|||
26-12-2022, 10:48 AM,
Post: #3
|
|||
|
|||
RE: Install Xentry 2014
I would used c3 to old mobile, I have sddvd1 and sddvd2 from torrent and that hasn’t mod dvd, that can make this problem? I have too version VMware but I don’t know how change sdconnect to c3
|
|||
26-12-2022, 11:07 AM,
Post: #4
|
|||
|
|||
RE: Install Xentry 2014
For C3 I have 12.2014 and 09.2015 that I installed years ago but the installation of these versions has nothing to do with the child's play of the current versions.Also if you do not have the addons it will not be a reliable version. I haven't installed one of these versions in a long time but I think your system does not meet the requirements to run the installation and not a key problem.
|
|||
26-12-2022, 13:09 PM,
Post: #5
|
|||
|
|||
RE: Install Xentry 2014
(26-12-2022, 11:07 AM)gcs190 Wrote: For C3 I have 12.2014 and 09.2015 that I installed years ago but the installation of these versions has nothing to do with the child's play of the current versions.Also if you do not have the addons it will not be a reliable version. I haven't installed one of these versions in a long time but I think your system does not meet the requirements to run the installation and not a key problem.And this is shot to 10! I try install in dell d420… Think you, I need only dell d630? |
|||
26-12-2022, 13:12 PM,
Post: #6
|
|||
|
|||
RE: Install Xentry 2014
Excuse me, I did not want to refer to the hardware capabilities but to all the preparation that it requires at the software level to be able to be installed.
|
|||
26-12-2022, 14:36 PM,
Post: #7
|
|||
|
|||
RE: Install Xentry 2014
(26-12-2022, 10:37 AM)gcs190 Wrote: I don't remember that the key was necessary to be able to install it... What interface are you going to use and with what vehicles? Why do you want that version and not something more current? From memory I would have said the same but had a look at an old guide and it installs star utilities first, enters a licence and only after that runs the installation from DVD1. This does not prove that a licence is needed in advance but this is the way we must have done it in the past? |
|||
26-12-2022, 14:40 PM,
Post: #8
|
|||
|
|||
RE: Install Xentry 2014
(26-12-2022, 14:36 PM)DBCT Wrote:(26-12-2022, 10:37 AM)gcs190 Wrote: I don't remember that the key was necessary to be able to install it... What interface are you going to use and with what vehicles? Why do you want that version and not something more current? Possibly you are right, I installed 2014 and 2015 for C3 for years and then adapted for SD Connect, I have them virtualized and from time to time I use them but I no longer remember the details of their installation |
|||
26-12-2022, 15:38 PM,
Post: #9
|
|||
|
|||
RE: Install Xentry 2014
(26-12-2022, 14:36 PM)DBCT Wrote:(26-12-2022, 10:37 AM)gcs190 Wrote: I don't remember that the key was necessary to be able to install it... What interface are you going to use and with what vehicles? Why do you want that version and not something more current? I do it. First install all driver past, newguide2j wps past prepare.bat here restart pc remove from owner account password to star account. Next I see on pulpit star untitled, in start key enter new keys, but I open dvd and Setup, Klick 2x next is preparing and error. |
|||
26-12-2022, 18:18 PM,
Post: #10
|
|||
|
|||
RE: Install Xentry 2014
(26-12-2022, 15:38 PM)KrystianPL Wrote: I do it. First install all driver past, newguide2j wps past prepare.bat here restart pc remove from owner account password to star account. Next I see on pulpit star untitled, in start key enter new keys, but I open dvd and Setup, Klick 2x next is preparing and error. Did you check that the licence was saved properly? Close startkey center and run again and see if the licence is still valid? It could also be that the licence is fine but prerequisites are not fulfilled. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content