Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F48 headlight module problem
29-12-2022, 02:39 AM,
(This post was last modified: 29-12-2022, 02:41 AM by laquangksxd.)
Post: #1
|
|||
|
|||
F48 headlight module problem
I have problem with F48 led headlight module:
- Hwel on module label and e-sys display is different. - Realoem said this module is common for F48 and Mini Cooper. - Can't Vo Code with FA F48 (Tried with many FA with 5A2/5A4 wiht date difference). - Can Vo Code with FA Mini Cooper. - Used 2 Modules but the result is same. - Flashed but no results Any comments are highly appreciated. - Secure coding (NCD 2.0) fit to FA changed (Typschlussel, Serie, Region...).
- Remove component protection MGU18/21 (only case BDC replace). - ID8.5 (SFA) conversion/ change region map. - Virgin Kafas4, MRR, RAM used. - Mgu patch, fsc custom match to vin, remove CP. - Reset ISN 7DTC, 8HP for F, G serie (include EGS7). - Write ISN MG1/MD1 with remotely. - Carplay/Android Auto MGU with/without ATM (6AE). Skype live:laquangksxd |
|||
29-12-2022, 07:19 AM,
Post: #2
|
|||
|
|||
RE: F48 headlight module problem
HWEL od right side is not compatible to this VO or Type code for this car, mayby in past both headlight was retrofit or something, the best way is to see FLE number from lest side if it work correctly and compare numbers.
|
|||
29-12-2022, 07:48 AM,
Post: #3
|
|||
|
|||
RE: F48 headlight module problem
(29-12-2022, 07:19 AM)zygi898 Wrote: HWEL od right side is not compatible to this VO or Type code for this car, mayby in past both headlight was retrofit or something, the best way is to see FLE number from lest side if it work correctly and compare numbers. Compared cafd and found the difference. There are about 200 lines of fdl that are different. But some fdl related to mapping, after editing fdl you can't code. - Secure coding (NCD 2.0) fit to FA changed (Typschlussel, Serie, Region...).
- Remove component protection MGU18/21 (only case BDC replace). - ID8.5 (SFA) conversion/ change region map. - Virgin Kafas4, MRR, RAM used. - Mgu patch, fsc custom match to vin, remove CP. - Reset ISN 7DTC, 8HP for F, G serie (include EGS7). - Write ISN MG1/MD1 with remotely. - Carplay/Android Auto MGU with/without ATM (6AE). Skype live:laquangksxd |
|||
29-12-2022, 08:04 AM,
(This post was last modified: 29-12-2022, 08:05 AM by Node.)
Post: #4
|
|||
|
|||
RE: F48 headlight module problem
(29-12-2022, 07:19 AM)zygi898 Wrote: HWEL od right side is not compatible to this VO or Type code for this car, mayby in past both headlight was retrofit or something, the best way is to see FLE number from lest side if it work correctly and compare numbers. This is BS. This HWEL is PERFECTLY normal and used from factory in F48. To OP: It is, however, FLE HIGH. ESys wants you to have FLE MID. So it's clearly options/type code/factory level issue. Either provide ANY useful information on what you are doing or figure it out yourself. It's just too many combos to list them ALL here. |
|||
29-12-2022, 09:40 AM,
Post: #5
|
|||
|
|||
RE: F48 headlight module problem
(29-12-2022, 08:04 AM) Node Wrote:(29-12-2022, 07:19 AM)zygi898 Wrote: HWEL od right side is not compatible to this VO or Type code for this car, mayby in past both headlight was retrofit or something, the best way is to see FLE number from lest side if it work correctly and compare numbers. So why esys wants to change HWEL to number like is in the left headlight? (29-12-2022, 07:48 AM)laquangksxd Wrote: Compared cafd and found the difference. There are about 200 lines of fdl that are different. But some fdl related to mapping, after editing fdl you can't code. I mean to check part number od FLE module and compare both in ETK |
|||
29-12-2022, 10:05 AM,
(This post was last modified: 29-12-2022, 10:43 AM by Node.)
Post: #6
|
|||
|
|||
RE: F48 headlight module problem
(29-12-2022, 09:40 AM)zygi898 Wrote: So why esys wants to change HWEL to number like is in the left headlight? Because according to type code/options/factory level combination there should be different hardware. Now OP did not state whether he replaced left or right. So we DON'T know whether HWEL does not match on replaced or remaining module. Everything else follows from that. IMHO most probably he put new HIGH while car needs MID because else I would expect ESys complain on BOTH FLEs. |
|||
29-12-2022, 13:43 PM,
(This post was last modified: 29-12-2022, 13:44 PM by laquangksxd.)
Post: #7
|
|||
|
|||
RE: F48 headlight module problem
(29-12-2022, 08:04 AM) Node Wrote:(29-12-2022, 07:19 AM)zygi898 Wrote: HWEL od right side is not compatible to this VO or Type code for this car, mayby in past both headlight was retrofit or something, the best way is to see FLE number from lest side if it work correctly and compare numbers. Hi, Here is the svt with both headlights having problem. Can you help me to build FA to be svt with hwel(fle) compatible? |