[Carremapper]

Hi all,
I have a DTC after DPF+EGR OFF P0095 - intake manifold temp sensor fault.
Checked everything okay regarding the sensor.

Peugeot 407 2.0 HDI 136HP - SIEMENS SID803

I found the most of the DTC tables but I wouldn't find sw1 switch to off the P0095 DTC completely.

I removed at #40EE8 address but I need the SW1 Adress to fully switch off.

Can somebody help me to find? - Attached the mappack made by PPD Maps

Thank you very much!

[moriaz]

try this file with dtc off pm for password

[zapdus]

Hi
I had the same problem on the same car, same engine
Your dpf egr solution is wrong thats why you have that DTC

[Carremapper]

Do you have a correct solution for that? Or can you help me to find a way to correct my file?

The car was modified previously by unknown person. :/
This solution copied from 307 2.0 RHR which works okay with these mods.
Thank you very much!

[zapdus]

Do you have a correct solution for that? Or can you help me to find a way to correct my file?

The car was modified previously by unknown person. :/
This solution copied from 307 2.0 RHR which works okay with these mods.
Thank you very much!

Hi sure, check PM