[skyarea]

My Xentry DAS C3 for the Sprinters but my date expired.  I fixed the date correctly on BIOS and XP and had it working again.  I am able to load DAS but when it checks the vehicle for VIN and mileage I am getting this fault return Fault (1.1)-1.501.9560.  I believe this points to the OBD2 cable but not sure.  The cable looks fine and not broken on the outside insulation.  Could have I messed up the keys in some of the programing when I changed the date?  Or does know what the correct fix is for the fault here?

[sparky001]

Hi,
My C3 does the same every now & then. Usually disconnect cables, reconnect, jiggle a little (the cables not you) & retry

good luck

[gcs190]

My Xentry DAS C3 for the Sprinters but my date expired.  I fixed the date correctly on BIOS and XP and had it working again.  I am able to load DAS but when it checks the vehicle for VIN and mileage I am getting this fault return Fault (1.1)-1.501.9560.  I believe this points to the OBD2 cable but not sure.  The cable looks fine and not broken on the outside insulation.  Could have I messed up the keys in some of the programing when I changed the date?  Or does know what the correct fix is for the fault here?

It is a PC-mux communication problem. It is impossible to achieve more without working on it.