Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

What programmer do I need ?
07-01-2023, 09:53 AM,
Post: #21
RE: What programmer do I need ?
This will do most Jobs for you     
Quote this message in a reply
17-01-2023, 14:41 PM,
Post: #22
RE: What programmer do I need ?
I just received my T48
Quote this message in a reply
01-03-2023, 16:10 PM, (This post was last modified: 01-03-2023, 16:11 PM by M290TD.)
Post: #23
RE: What programmer do I need ?
It seems that the T48 is already dead.

It refuses to erase and program chips since today.

I had sent to Zapdus, an ecu dump of an MB ECU for 290 (another ECU) and he told me that he could not do anything about it because "bad read".

[Image: xz0j.jpg]

[Image: l83p.jpg]


I restarted the pc, did the program update and reflash the programmer but no change.

I will contact the seller but hey, 2 programmers of the same brand that works 2 or 3 times or not at all... I no longer have confidence.

I read and wrote less than 10 chips...

I will probably have to invest in a real programmer. What do you have for material ? Only material that has been tested over time.

(07-01-2023, 09:53 AM)al70 Wrote:  This will do most Jobs for you 

This drive looks even more moldy than my T48
Quote this message in a reply
01-03-2023, 16:43 PM, (This post was last modified: 01-03-2023, 16:55 PM by mkii.)
Post: #24
RE: What programmer do I need ?
software 12.45 have bug ............try 12.50

it s new 27c1001a ????

because its one time programmable !!!


Attached Files
lien.txt
File Type: .txt
Downloaded: 1 times
Size: 65 bytes


Think Thanks and rep !!!
Quote this message in a reply
01-03-2023, 18:20 PM,
Post: #25
RE: What programmer do I need ?
(01-03-2023, 16:43 PM)mkii Wrote:  software 12.45 have bug ............try 12.50



it s new 27c1001a ????

because its one time programmable !!!

I update to 12.50, no change.

The reading of 27C1001a is not good ( bad read ) and the writing of AM28F020-120JC don't work.
Last time it worked flawlessly.

I will see to take a Willem GQ-4X V4, I hope this one will work better than the T48.

Unless you have something better to offer.
Quote this message in a reply
01-03-2023, 18:42 PM,
Post: #26
RE: What programmer do I need ?
strange !!!

i have tl866II PLUS buy to xgecu shop and work perfectely !!!

Think Thanks and rep !!!
Quote this message in a reply
01-03-2023, 21:47 PM,
Post: #27
RE: What programmer do I need ?
"It refuses to erase and program chips since today."

@M290TD what do you want with 27C1001 ? Do you readed data sheet of this device ? Menu "Blank" do not mean "erase". "Blank"  verify if the device is blank or not. Yours is not blank. And in this conditions, of course writing will fail.
Quote this message in a reply
02-03-2023, 03:56 AM,
Post: #28
RE: What programmer do I need ?
Hi
I had problems with my old tl866 but after writing like 100+ chips
Had to open programmer and solder a component that was making bad contact on the PCB
Most of issues were with 27c1001 EPROMs from bmw , on 29F010 worked fine
But on bmw EPROMs was boring because had to erase chips when programming failed
After that fix keep working until now
I have bought it more than 5 years ago

Chip Diesel

Peugeot 206 2.0 HDI 90HP @3XX HP LOADING [Image: drive.gif]

GTB2060VKLR billet

Autotuner/MPPS/ECUDecoder/ECMTitanium ORI
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  New tool fox flash programmer - opinion and suggestion dragon100 37 17,398 25-11-2023, 22:27 PM
Last Post: king kong
  Programmer for Suzuki GSX-R L1 Denso ECU sammy3502 0 172 18-10-2023, 11:48 AM
Last Post: sammy3502
XZBMW Stage1- Best BMW ECU programmer smilo 2 748 07-03-2023, 14:35 PM
Last Post: smilo
0Dash Cgdi FC200 ECU Programmer Feedback Zenix 5 3,062 29-01-2023, 14:56 PM
Last Post: mendox
  Best programmer and software benlodite 4 2,590 02-12-2016, 10:32 AM
Last Post: Vlado ATM Chiptuning
  Programmer read TC1738 sayf 4 3,487 05-04-2016, 04:18 AM
Last Post: sayf
  Programmer comawi 1 1,265 03-03-2016, 18:29 PM
Last Post: teme69

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content