Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
nbt evo to obd2 wiring E series
|
08-01-2023, 14:56 PM,
(This post was last modified: 08-01-2023, 15:33 PM by Fx82.)
Post: #1
|
|||
|
|||
|
nbt evo to obd2 wiring E series
I've installed enet wiring into my E60 for the evo unit to fdl code etc.
I don't see the evo unit in e-sys. I've it now on my bench with the wiring as follow (same as the car): Oabr to OBD2 17 -------------> pin 12 19 -------------> pin 13 18 -------------> pin 3 20 -------------> pin 11 29 Quadlock -------> pin 8 I'm using can bridge interface on the bench and connected just + and -. I've set static ip on the laptop to 169.254.199.98 Subnet on 255.255.0.0 On e-sys I connect on gateway with tcp://169.254.199.99:6801 but I don't see the evo unit. I can endless ping the evo unit in the terminal at 169.254.199.99 I'm using an ethernet cable. On the obd2 port I connected the ethernet wiring and + and -. When I read out the unit with tool32 I get the error ifh-0003 datatransmission to interface disturbed MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
21-08-2023, 20:08 PM,
Post: #2
|
|||
|
|||
|
RE: nbt evo to obd2 wiring E series
I tried a lot of thing but no luck.
I now installed zgw module and can finally connect to the evo unit. MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
|
|
|
21-08-2023, 20:12 PM,
(This post was last modified: 21-08-2023, 20:14 PM by DieStream.)
Post: #3
|
|||
|
|||
|
RE: nbt evo to obd2 wiring E series
Do have a CCC or Mask before?
You mean with Ethernet cable a OABR Cable? |
|||
|
|
|
22-08-2023, 00:28 AM,
Post: #4
|
|||
|
|||
|
RE: nbt evo to obd2 wiring E series
I had ccc before and yes tried to connect over oabr with enet cable but doesn't work. I can ping the hu but can't connect to it.
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
|
|
|
22-08-2023, 05:42 AM,
Post: #5
|
|||
|
|||
|
RE: nbt evo to obd2 wiring E series
|
|||
|
|
|
22-08-2023, 06:36 AM,
Post: #6
|
|||
|
|||
|
RE: nbt evo to obd2 wiring E series
Tried also but doesn't work.
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
|
|
|
22-08-2023, 07:31 AM,
Post: #7
|
|||
|
|||
RE: nbt evo to obd2 wiring E series
(22-08-2023, 06:36 AM)Fx82 Wrote: Tried also but doesn't work. Did you put a resistor on the OBD port? It is imperative. |
|||
|
|
|
22-08-2023, 13:38 PM,
Post: #8
|
|||
|
|||
|
RE: nbt evo to obd2 wiring E series
Same problem on my e60 if i want to work all the time i pull the fuse from the climate and esys read..
|
|||
|
|
|
22-08-2023, 19:38 PM,
(This post was last modified: 22-08-2023, 19:38 PM by Fx82.)
Post: #9
|
|||
|
|||
|
RE: nbt evo to obd2 wiring E series
Pull the fuse from climate control ?
(22-08-2023, 07:31 AM)DieStream Wrote:(22-08-2023, 06:36 AM)Fx82 Wrote: Tried also but doesn't work. I did but doesn't matter. MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
