[cfocosta]

Hi, Folks!

I received a BSI to repair with the following characteristics:
- Brand: Siemens
- Used: Peugeot 206 1.4 2004
- Code: 9650584680 / S118085220B / E02-00 MG
- EEPROM: ST 95160

I need the corrected eeprom file, because this BSI is not working.
I can not find the VIN code, PIN code and the mileage values.

I attached the corrupted file to be used to check some parameters.

Does someone have the eeprom file corrected or even a working eeprom where I can test it?

Many Thanks and a Happy New Year.

Carlos Frederico Costa

[mactronic]

You need to code the BSI: PIN,VIN,config with a diagnostic device eg. Peugeot Planet (PP2000). You can read the correct pin from the ECU.

[cfocosta]

You need to code the BSI: PIN,VIN,config with a diagnostic device eg. Peugeot Planet (PP2000). You can read the correct pin from the ECU.

Thanks for your attention.

I have just received the BSI module, not with the car.
My question is about with this BSI file I can get the following info:
- Is the mileage available in EEPROM?
- Is the VIN code is also available?
- Is the PIN code is also available?

If this EEPROM file content is not correct, I need another one that I can use the PP2000 inside the BSI.

Is it possible to get this info for me with the file attached?

Many Thanks.

Carlos Frederico Costa

[volavka]

My question is about with this BSI file I can get the following info:
- Is the mileage available in EEPROM?
- Is the VIN code is also available?
- Is the PIN code is also available?

Hi

No dump is fully corrupted 

Br.V

[cfocosta]

My question is about with this BSI file I can get the following info:
- Is the mileage available in EEPROM?
- Is the VIN code is also available?
- Is the PIN code is also available?

Hi

No dump is fully corrupted 

Br.V

Thank you for your answer.

Now I need a eeprom file for BSI with these characteristics:
- Brand: Siemens

- Used: Peugeot 206 1.4 2004
- Code: 9650584680 / S118085220B / E02-00 MG
- EEPROM: ST 95160


Is there anyone with a eeprom file for this BSI? The file can be one with a VIN code, and a PIN code and a mileage data, or a reset file.
I can rewrite this file to the eeprom with the VIN code and the mileage. I can put 0xFFh to the PIN code and the others parameters, like VIN code and mileage data I will ask the owner of the car these informations.
Is there any way to get the PIN code from other modules, like ECU?

Many thanks for any help.

Carlos Frederico Costa

[mactronic]

You will need to code the car's equipment so PP2000 is the simplest way.
Or AVDI/FVDI you can write in car PIN/VIN and key programing and car starts 
(but will be error configuration)

Pin you can get from ECU

[cfocosta]

You will need to code the car's equipment so PP2000 is the simplest way.
Or AVDI/FVDI you can write in car PIN/VIN and key programing and car starts 
(but will be error configuration)

Pin you can get from ECU

Thanks a lot.

What values can I put in BSI 95160 eeprom before replacing in the car?

That it is my issue, due to the corrupted eeprom file.

Many Thanks.

Carlos Frederico Costa

[cfocosta]

Hi!

I do not find a eeprom file to BSI with these characteristics:

- Brand: Siemens
- Used: Peugeot 206 1.6 2004
- Code: 9650584680 / S118085220B / E02-00 MG
- EEPROM: ST 95160


As you can see in my last question, I need a eeprom file for this BSI, even if it is one from different vin or PIN. But it is important to be from a BSI coded above.


Is there anyone that it can help me?


Many Thanks.