Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Help me golf GTE stage1
30-12-2022, 06:50 AM,
Post: #1
|
|||
|
|||
Help me golf GTE stage1
Hi friends!!!
I will tell you about my case, it turns out that I have a golf GTE 2015 204cv, and I requested the file service of a company, I sent my original file and they returned the modified file, I loaded it to the ecu and everything was correct except for a problem that was detected by the days of use, I am giving you data and tools: my control unit is BOSH MED17.1.21 I program it with KTAG The problem I have is that the vehicle works perfectly when the 2 engines work at the same time or when the electric one only works, but when only the gasoline engine works and the vehicle goes from 3500rpm to 6000rpm it jerks, it can be seen how it loses power and recovers it, it jumps in power and it becomes a bit uncomfortable when you work only with the gasoline engine, connect the GTE mode and enter the 2 engines, the car goes very well and a very considerable increase in power is appreciated, but when it is The battery runs out and only the gasoline one works, it becomes very uncomfortable, I told them about the problem and they sent me more files, but the problem was not resolved and with those other files the vehicle was failing due to other things, they also told you that the vehicle with the file original goes perfectly and has no fault, also tell you with the file that they sent me which one goes more or less well the car tends to leave the rear part black and the exhausts black when or it works with the gasoline engine, I'm going to attach the 2 files to see if someone could tell me what the problem is, I'm currently using the car with the original file and it's going very well but with stage 1 it's amazing. Thanks a lot!! |