[konradzd]

Hi. I have problem with audi a6 c6 2010 year. Ecu is Edc17cp14. I have dtc P164B and P164E. Car run 700km and oil pressure is ok but i have limp mode 2500rpm and dtc. I dtc off and in ecu is clear but car run max 2500rpm. In dash i see "do not exceed max engine speed of 2.5 rpm"

if I disconnect the oil pressure sensor (1 pin) car run ok but in dash i see oil pressure to low.
Someone help with the limp? If solution work i pay

[Trimax]

try this and report

[konradzd]

try this and report

not work :/

[lsalt100]

try this and report

not work :/

I thing so swithing this kind of fault is little bit dangerous.....better to solve....

[konradzd]

problem solved. i change oil pressure sensor and all is good. oil pressure next to the oil valve
thanks all. Best regards