[leonidas]

   
Hi,
i change a complet Engine with other Pump.
Just i must learn the Vp44 pumpe.
Who can help? Can make it with VCDS? I have no PIN.
its possible with SVCI to check the PIN?

Yes i know,i can change only the Pump Ecu but dont want cut cables.

BR
leonidas

[loki954]

first of all you have to provide more info

[leonidas]

sorry,here the codes

[loki954]

and the car is ????????????? the ecu .......the pump........ the engine ......the year .......

sorry but i lost my crystal ball years ago 

[leonidas]

its a Audi A4 2,5tdi BDG engine Code from 2005,
its a vp44 pump... all information
just i read eeprom with can commander.

[elektronik13]

its a Audi A4 2,5tdi BDG engine Code from 2005,
its a vp44 pump... all information
just i read eeprom with can commander.

pin is 05283

[leonidas]

its a Audi A4 2,5tdi BDG engine Code from 2005,
its a vp44 pump... all information
just i read eeprom with can commander.

pin is 05283

 Pin for learn immo?

[loki954]

Injection Pump Swapping

Prerequisites:

• The NEW Injection Pump is installed in the car.
  
  
• Battery voltage at least 12.5 V.
  
  
• Make sure to have the Immobilizer PIN, for the Engine Control Unit (ECU).
  
  

[Select]
[01 - Engine]

[Login - 11]

• 4-digit PIN
  
  • The PIN needs to be entered as 5-digit number. For example, if your PIN is 1234, enter 01234.
    

[Do it!]

[Adaptation - 10]
Enter 050 in "Channel Number".
[Read]

• 4-digit PIN
  
  • The PIN needs to be entered as 5-digit number. For example, if your PIN is 1234, enter 01234.
    

[Save]
[Done, Go Back]
[Close Controller, Go Back - 06]

• Switch OFF the ignition and let the car sit for ~1 minute, then switch ON the ignition again.
  
  
• Start the Engine to verify the adaptation was successful.
  
  

[amor89]

hello;
if you want it to start you have to do immo off on the bosch edc15vm+ injection computer
if not write it in your computer you will see its start

[leonidas]

its a Audi A4 2,5tdi BDG engine Code from 2005,
its a vp44 pump... all information
just i read eeprom with can commander.

pin is 05283

 Pin for learn immo?

WORKS fine.
with VCDS 3min finish.