Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Icom next KL15 problem after Updated
12-01-2023, 08:44 AM,
Post: #1
|
|||
|
|||
Icom next KL15 problem after Updated
I have updated an ICOM next but now KL15 reads 0 volts. I have tried to restore but the same problem persists.
Any ideas? Icom was working well with old ISTA but demanded firmware update with new ISTA 4.3x. I used ISTA to update it. I would not mind being able to restore previous firmware so it is usable with INPA |
|||
12-01-2023, 08:50 AM,
Post: #2
|
|||
|
|||
RE: Icom next KL15 problem after Updated
Check for bent pins on the icom
|
|||
18-01-2023, 08:24 AM,
Post: #3
|
|||
|
|||
RE: Icom next KL15 problem after Updated
No bent pins. No idea why a software update did this.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content