Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Icom next KL15 problem after Updated
12-01-2023, 08:44 AM,
Post: #1
|
|||
|
|||
Icom next KL15 problem after Updated
I have updated an ICOM next but now KL15 reads 0 volts. I have tried to restore but the same problem persists.
Any ideas? Icom was working well with old ISTA but demanded firmware update with new ISTA 4.3x. I used ISTA to update it. I would not mind being able to restore previous firmware so it is usable with INPA |
|||
12-01-2023, 08:50 AM,
Post: #2
|
|||
|
|||
RE: Icom next KL15 problem after Updated
Check for bent pins on the icom
|
|||
18-01-2023, 08:24 AM,
Post: #3
|
|||
|
|||
RE: Icom next KL15 problem after Updated
No bent pins. No idea why a software update did this.
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
NBT EVO Connected Drive problem after update I-Level | SkeYT | 47 | 4,704 |
22-04-2024, 11:44 AM Last Post: kwat |
|
[MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS | hashtagmaster | 105 | 36,028 |
17-04-2024, 18:36 PM Last Post: hashtagmaster |
|
Bmw G31 retrofit Mgu id7 atm problem | intranet | 19 | 2,317 |
15-04-2024, 09:21 AM Last Post: evaldazj |
|
ICOM Firmware (NEXT & A2) always current! | Vojno | 206 | 43,285 |
12-04-2024, 23:36 PM Last Post: bennymx |
|
Poor wifi signal from new ICOM's | bmchicago | 3 | 321 |
12-04-2024, 18:55 PM Last Post: Node |
|
BMW E60 coding problem | GarageX | 8 | 354 |
02-04-2024, 10:07 AM Last Post: GarageX |
|
Solved ✔ ICOM NEXT Error | bmwcare | 4 | 2,489 |
01-04-2024, 11:34 AM Last Post: ivanp |
|
CCC flash WINKFP ICOM | BimmerSLO | 9 | 367 |
29-03-2024, 19:17 PM Last Post: Hoborg |
|
Bmw 5,f10 radio problem | RobertRexhaj | 3 | 154 |
28-03-2024, 18:47 PM Last Post: Unspec |
|
ISTA launcher problem | Red_bean_bun | 1 | 260 |
26-03-2024, 05:11 AM Last Post: 2013m5 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content