Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Nissan Cabstar EDC17C45 3.0 DCI 130 adblue
13-01-2023, 08:52 AM,
(This post was last modified: 13-01-2023, 09:05 AM by zapdus.)
Post: #1
|
|||
|
|||
Nissan Cabstar EDC17C45 3.0 DCI 130 adblue
Hi
Im working on Nissan Cabstar 3.0 DCI 130hp with bosch edc17c45 ECU Hardware version: 23710LE00C ECU Software version: 23710LE12B Bosch Software version: 1037555577 I tested several solution but I have DTC and MIL on I try to run dpf, egr and adblue off My problem is adblue solution, car was running with empty dpf and adblue DTC, but no limp mode After driving car with bad solution 2-3 days I now have limp mode, if I load original file I have DPF DTC, P24A4 DPF Full, cant erase ths DTC and car is in limp mode but even slower Before DPF DTC car was running fine, no limp mode Do I need to reset DPF? What tool to use? When I write my solution DPF, EGR and ADBLUE, I only have ADBLUE DTC If I disconnect ECU adblue, DTC U0029 (CAN fault) appears and the car is in limp mode If I connect adblue ECU the car shows DTCs P208A and limp mode too Do I need to leave adblue ECU connected or disconnected?? |