[damian200037]

Hello please Stage1 and maf to map conversion , and hardcut rev limiter , egr off . EDC15P code block manual .Very thanks

[masterecmtuning]

Hello please Stage1 and maf to map conversion , and hardcut rev limiter , egr off . EDC15P code block manual .Very thanks

Test and report...

[damian200037]

Hello please Stage1 and maf to map conversion , and hardcut rev limiter , egr off . EDC15P code block manual .Very thanks

Test and report...

NO WORKING

[zapdus]

Hello please Stage1 and maf to map conversion , and hardcut rev limiter , egr off . EDC15P code block manual .Very thanks

Hi
I see you have winols
Better if you learn and try yourself
There is a switch from MAF to MAP but then must build smoke limiter by MAP, map is all 60mg, dont expect someone to do free
I will not do your file but I will always help
See the attachment, all what you need to do is there

Hardcut is easy, there is a single rev limiter value SVRL
EGR OFF also just set all EGR map to 850 done, you can also disconnect vacuum, fit egr blank plate
For stage 1 on that ecu is very easy, I think that ecu is the most tuned over the world, lots of tutorials

Attached tutorial
Stage 1 with hardcut SVRL, EGR delete, fuel air calculation, building tune, fuel maps, duration maps, maf delete (pass after rep+thanks)