Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ford Mondeo Mk4 1.6 TDCi 2013 year problem with HS CAN
19-01-2023, 07:36 AM,
Post: #1
|
|||
|
|||
Ford Mondeo Mk4 1.6 TDCi 2013 year problem with HS CAN
Hello I have Ford Mondeo Mk4 1.6 TCDi ECU SID807EVO 2013 year. The car is no starting even starter not working. No any communications with not eny module on HS CAN.
Maybe somebody can help where check. On PCM on CAN H I have 3.6V an on CAN L 3.4V thats wrong I thing. I need any NETWORK DIAGRAM. |
|||
19-01-2023, 23:36 PM,
Post: #2
|
|||
|
|||
RE: Ford Mondeo Mk4 1.6 TDCi 2013 year problem with HS CAN
disconnect the battery for 20 mins, with battery still disconnected, check resistance between pin 6 and 14 on OBD connector, do you have 60 Ohms?
|
|||
Reputation: +1 - al70 [+1] | |||
20-01-2023, 05:54 AM,
Post: #3
|
|||
|
|||
RE: Ford Mondeo Mk4 1.6 TDCi 2013 year problem with HS CAN
Hello yes I checked this already and I have 60 ohm but when the battery is connected and power on the CAN H need 2.7V and CAN L 2.3V here I have more kike this.
I need any NETWORK DIAGRAM from this Ford. Do you have? |
|||
20-01-2023, 09:12 AM,
Post: #4
|
|||
|
|||
RE: Ford Mondeo Mk4 1.6 TDCi 2013 year problem with HS CAN
|