Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Bricked NBT Evo ?
20-01-2023, 20:25 PM,
Post: #1
|
|||
|
|||
Bricked NBT Evo ?
Hello,
I got an evo unit from G series, it was acting up since HDD was dead. I've replaced it with SSD, cleared SWT (didint want to accept F.E. ones) and V850 just to have a clean start into troubleshooting. Then I flashed it to "Y" and it was working fine for a while on a bench. All of a sudden it lost CarPlay, then ibad's were not available. Resorting CP via Feature Installer was futile hence I decided to flash it once again. After bootloader flash finished 100% it went straight to 5 sec bootloop and I'm not able to ping nor connect with it via putty or esys. Support is very welcome and will be gratified I was thinking about getting a programmer and this might be a good "push" for it, but I need someone skilled to help me out here. VVDI would do the tric with EVO ? 100% sure that such skilled gent is out here somwhere |
|||
22-01-2023, 00:28 AM,
Post: #2
|
|||
|
|||
RE: Bricked NBT Evo ?
Did you prepare the SSD after installing or just hope an install and flash would be enough?
I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC BMW ISPI Admin Client License (Contact for info) Complete EntryNav2 FSC solution for Retrofit/Component Protection KAFAS2 7E/BE/BF KAFAS4 11F/13E/13F Carplay activations/FullScreen/ID4-5 EntryNav2 Carplay activations OEM/Provisioning Contact me for more information |
|||
22-01-2023, 09:45 AM,
Post: #3
|
|||
|
|||
RE: Bricked NBT Evo ?
|
|||
22-01-2023, 09:57 AM,
Post: #4
|
|||
|
|||
RE: Bricked NBT Evo ?
Bro you haven’t answered my question. You cannot just place a new SSD inside and just use it, you must prepare it for use once installed. Was your SSD prepared and formatted in the EVO?
I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC BMW ISPI Admin Client License (Contact for info) Complete EntryNav2 FSC solution for Retrofit/Component Protection KAFAS2 7E/BE/BF KAFAS4 11F/13E/13F Carplay activations/FullScreen/ID4-5 EntryNav2 Carplay activations OEM/Provisioning Contact me for more information |
|||
Reputation: +1 - Twointje [+1] | |||
22-01-2023, 16:19 PM,
(This post was last modified: 22-01-2023, 16:19 PM by oros.)
Post: #5
|
|||
|
|||
RE: Bricked NBT Evo ?
(22-01-2023, 09:57 AM)DayvG Wrote: Bro you haven’t answered my question. You cannot just place a new SSD inside and just use it, you must prepare it for use once installed. Was your SSD prepared and formatted in the EVO? Yes, without create_hdd.sh and unlocking I would not be able to install maps and IBAD's |
|||
22-01-2023, 19:59 PM,
Post: #6
|
|||
|
|||
RE: Bricked NBT Evo ?
I can help you with bootloop on your evo, no need vvdi or any programmer.
• EGS7/7DCT300 ISN RESET REMOTE •
• KaFAS4 (MID/HIGH) MRR, RAM VIRGIN REMOTE • • NBTevo/ENTRYNAV2/MGU VIRGIN/PATCH • • HDD -> SSD NBT/NBTevo/MGU • CARPLAY NBTevo/EN2/MGU • • FULL FSC PATCH/RETROFIT CIC, EN2,NBT, NBT2, MGU, • • REMOVE CP --> NBTEVO ID4&6/Entrynav2/MGU • UK BASED! |
|||
22-01-2023, 20:19 PM,
Post: #7
|
|||
|
|||
RE: Bricked NBT Evo ?
(22-01-2023, 16:19 PM)oros Wrote:(22-01-2023, 09:57 AM)DayvG Wrote: Bro you haven’t answered my question. You cannot just place a new SSD inside and just use it, you must prepare it for use once installed. Was your SSD prepared and formatted in the EVO? you don't need create_hdd.sh it's just a script Coding 2.0 File Service - Region Change/Typekey - SFA iDrive 8.5 REGION CHANGE
BMW Full FSC Set + CarPlay - NBT EVO ID4/5/6/ENTRYNAV2 (CP REMOVE/PATCH) MGU CARPLAY/ANDROID AUTO Activation / MGU PATCH/CP REMOVE (EU service) ISN RESET Remote F/G series BMW KAFAS 2/4 FSCs(7E/BE/BF - 11F/13E/13F) BMW KAFAS4/MRR/RAM Virgin / VIN FSC Matching |
|||
23-01-2023, 12:38 PM,
(This post was last modified: 23-01-2023, 12:47 PM by oros.)
Post: #8
|
|||
|
|||
RE: Bricked NBT Evo ?
(22-01-2023, 19:59 PM)DEJMIEN Wrote: I can help you with bootloop on your evo, no need vvdi or any programmer. sure give it a try, I PM'ed you (22-01-2023, 20:19 PM)dasi Wrote:(22-01-2023, 16:19 PM)oros Wrote:(22-01-2023, 09:57 AM)DayvG Wrote: Bro you haven’t answered my question. You cannot just place a new SSD inside and just use it, you must prepare it for use once installed. Was your SSD prepared and formatted in the EVO? what do you mean ? mount all partitions and dir's manually ? |
|||
23-01-2023, 14:37 PM,
Post: #9
|
|||
|
|||
RE: Bricked NBT Evo ?
|
|||
23-01-2023, 19:26 PM,
Post: #10
|
|||
|
|||
RE: Bricked NBT Evo ?
(23-01-2023, 14:37 PM)Raimo5 Wrote:(22-01-2023, 19:59 PM)DEJMIEN Wrote: I can help you with bootloop on your evo, no need vvdi or any programmer. No, not every time you have to take money for a few clicks. • EGS7/7DCT300 ISN RESET REMOTE •
• KaFAS4 (MID/HIGH) MRR, RAM VIRGIN REMOTE • • NBTevo/ENTRYNAV2/MGU VIRGIN/PATCH • • HDD -> SSD NBT/NBTevo/MGU • CARPLAY NBTevo/EN2/MGU • • FULL FSC PATCH/RETROFIT CIC, EN2,NBT, NBT2, MGU, • • REMOVE CP --> NBTEVO ID4&6/Entrynav2/MGU • UK BASED! |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content