Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Virginise MJD 602
28-01-2023, 04:21 AM,
(This post was last modified: 28-01-2023, 08:41 AM by ch0ngin.)
Post: #1
|
|||
|
|||
Virginise MJD 602
after further deliberation i reset ECU with pin then used original pin to program immobiliser function in CIM,,
only to find i have DTC P0090 rail pressure control valve voltage low.. my engine don't have the extra sensor on rail.. so i need different hardware ECU or Rail with control valve / wiring to ecu? not sure if the rail control valve can be removed via OBD/BDM Firmware presumably.. i tried to remove DTC P0090.. Via Map car still didn't fire.. |