Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
TOOL READ EPROM 95x
29-01-2023, 19:21 PM,
(This post was last modified: 29-01-2023, 21:06 PM by Clusters.)
Post: #1
|
|||
|
|||
TOOL READ EPROM 95x
Hi
I am looking for a tool for reading/writing eprom 95320. Do you have any suggestions? This to make immo off on EDC16C36 renault master. Thanks! |
|||
29-01-2023, 20:47 PM,
Post: #2
|
|||
|
|||
RE: TOOL READ EPROM 95x
Almost every programmer reads and writes it,uupa ,xprog,orange,elnec ,original and clone...
|
|||
29-01-2023, 21:15 PM,
Post: #3
|
|||
|
|||
RE: TOOL READ EPROM 95x
Thank you canisha for your sharing.
I use Windows 10, would one of these tools/programs be more suitable for this operating system? |
|||
30-01-2023, 00:35 AM,
Post: #4
|
|||
|
|||
RE: TOOL READ EPROM 95x
Hi mate
you are looking for the programmer it's okay but immo off not exist yet for this ECU Br.V BEST CHIPTUNING SERVICE BY Zenter Performance
Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
30-01-2023, 16:45 PM,
Post: #5
|
|||
|
|||
RE: TOOL READ EPROM 95x
thank you for the info, I think to make virgin or emulator.
|
|||
01-02-2023, 21:18 PM,
Post: #6
|
|||
|
|||
RE: TOOL READ EPROM 95x
In my opinion, if you don't hawe any memory programmer, best deal is xgecu TL866-II plus. Cheap, simple to use, constantly update. Work on win 10.
|
|||
02-02-2023, 16:46 PM,
Post: #7
|
|||
|
|||
RE: TOOL READ EPROM 95x
exactly
I own several programmers such as - xprog-m_ori, beeprog_ori, orange_ori, upa and the like, but I prefer xgecu TL866-II plus to read eeprom. |
|||
02-02-2023, 18:03 PM,
Post: #8
|
|||
|
|||
RE: TOOL READ EPROM 95x
|
|||
02-02-2023, 19:50 PM,
Post: #9
|
|||
|
|||
RE: TOOL READ EPROM 95x
Thank you very much for your feedback! It's very nice!
Before ordering a new tool I read via ktag (bdm) reading is okay only one thing bothers me is that the protocol eprom (P69) is an ST95640 when in reality it is an ST95320. Does it affect read or write? I attach the file, if someone wants to take a look at it to virginize this one. (eeprom / flash and full backup) As said above it would be to stop the immobilizer of the vehicle, this one blocks the starting of the vehicle from time to time. I am interested in advice if a particular procedure to follow after viginization of the eprom. Thanks again. |