[papaosman]

Hello friends, i need some help and advice

Passat b6 2.0 BMR 170ps 

I want to swap just engine from passat 2.0 BKP 140ps to  passat that was orginaly with BMR engine,

Can it be swapped with just engine without ecu and other things? 
Both has siemens ECU 
Will it work?

Thank you

[zapdus]

Hi

It should work only replacing engine
However I think if you swap engine you must use original injector and turbo from original BKP engine otherwise must adjust ECU
If engine block and head is the same no problem

[papaosman]

Hi

It should work only replacing engine
However I think if you swap engine you must use original injector and turbo from original BKP engine otherwise must adjust ECU
If engine block and head is the same no problem

BKP engine is complete, with injectors, but ecu and turbo is from BMR engine
BKP has 140ps
BMR has 170ps

[zapdus]

Hi

It should work only replacing engine
However I think if you swap engine you must use original injector and turbo from original BKP engine otherwise must adjust ECU
If engine block and head is the same no problem

BKP engine is complete, with injectors, but ecu and turbo is from BMR engine
BKP has 140ps
BMR has 170ps

I dont know how to adjust injectors on that ECU
Is car working that way or still didnt start?

[spacewalker]

flash ecu to proper soft , if both use this same HW

[papaosman]

Hi

It should work only replacing engine
However I think if you swap engine you must use original injector and turbo from original BKP engine otherwise must adjust ECU
If engine block and head is the same no problem

BKP engine is complete, with injectors, but ecu and turbo is from BMR engine
BKP has 140ps
BMR has 170ps

I dont know how to adjust injectors on that ECU
Is car working that way or still didnt start?

I have not adjusted anything, the ECU and Turbo are from BMR, the car starts, but the turbo does not activate, and the ecu does not register any errors when I remove any connection, for example, the air mass sensor or any other

---

flash ecu to proper soft , if both use this same HW

This is ECU from BMR (170ps) that is on the car

I dont have ECU from BKP (140ps) engine, 

I think HW is 03G 906 018 CK for BKP but im not sure,

What you think? Do i have to change ECU, and if i change ECU then i need to change Turbo too

[papaosman]

I changed the ECU from 140ps, i put 03G 906 018 A, car starts and runs, now it registers errors when i disconect the air mass sensor or any other sensor, but Turbo is not working, not activating

now if i change Turbo, i will need to change engine wiring also,
im i right?