[skyrimzz]

hey guys i have ford focus 2009 with
bosch

9m5t14b321ba
 0285010687
can someone please make clear crash,
i have few different software but they dont support 0285010687 version
thanks in advance

[mechanior2686]

Please, my friend, act

[skyrimzz]

thanks,i will test it and then report

[skyrimzz]

tested but now i dont have communication with rcm(airbag module)and it was weird so i put back ori eeprom and it is the same thing..now i cant read modul with forscan?is it possible that module is dead?

[ady2006]

Have you reinstall mechanical fixing of module ? Many times, without ground provided by car chassis, obd communications is not ok.

[al70]

here's a tested working solution for your car but i'm sure mechanoir's solution is ok, do what adys says, fasten the module back in its position in the car for communication

[skyrimzz]

thanks guys for help,module hasnt been bolted to car..module gets ground thru bolts that connect it to chassis crash detected is cleared ,still need to resolve retractor circuit errors,i still have 2 errors B1877 AND B1881 Drivers and passenger retractor circuit failure?i never did focus and im trying to google it and is that pretensioner or buckle problem?can i put resistors on its place and where?thanks

[skyrimzz]

if u have B1877 and B1881 u need to put on each side resistor 2.7 or similar and then u will have those errors cleared or instal new pretensioners
thanks everyone for help